Help getting new board to post

[mattyj1085]

Just installed a new board a Asus P5E but it won't post with my OCZ ram, I got it to post once with just one stick

Currently got some generic dd2 ram in it so can get into the bios to try and change the ram settings manually to see if that works

I've got 4 x 1GB OCZ PC2 6400 Platinum Rev2 sticks rated at 2.2v and 4-4-4-15 timings

I've tried setting this in the bios but I still get no post on the Asus board

Can anyone give me any help on what other settings I could try to try and get it to post with my OCZ ram??

Cheers

 

[wrayvon]

Try loosen the timings to get it running. Then once it is you can adjust them again bit by bit

 

[robmagee]

Sticks never run as well when there is 4, you may have to lossen up a bit to componsate

 

[mattyj1085]

Fixed it I swapped mysticks with brothers that are the ocz gold series same spec and it works!! mine work in his fine aswel

 

[robmagee]

poor brother