Help needed before i go mad

Associate
Joined
17 Nov 2005
Posts
11
Hi i'll list my system again as i got the screen of death just now.
Sapphire pure adv mobo pc-a9rd480adv
Amd 3.7 sandiego cpu
2gb corsair twin x matched
2 x Sapphire x850xt graphics cards
X-fi sound card
1x seagate 120gb hard drive
ulta x 500watt psu

Ok i keep getting the screen of death.Temps all good, voltages seem ok,have tried different ram no diffrence,have tried uping voltages no difference.It very bad in dual channel so i have to run single but even then it will do it after about 1 hour sometimes sooner.All components are about 3 months old accept the ram wich i just got to replace my ballistix thinking it was ram but its not. What are your thoughts on the mobo or the psu.It does seem to be getting worse slowly. Thanks for taking the time to read this post.
 
ok here it is.

STOP: 0X0000008E (0X0000005 , OXBF824EB6 , 0XF4B6FB18 , 0X00000000)

WIN32K.SYS - ADDRESS BF824EB6 BASE AT BF800000 DATE STAMP 43446a58

thats it folks.

Just a thought both makes of ram i have tried have been pc4000.Is it just a case of my motherboard doesnt like running pc4000 in dual channel.
 
Last edited:
Ok not getting anywhere so i 've just ordered an asus mobo as according to the sapphire forum there are about 4 other people with the same problem and it turned out to be the board how , how crap is that. The Asus board is said to be the most stable guess i'll have to wait and see.
 
Back
Top Bottom