help needed for oc on p8z68v-pro/2500k

[chillidog]

hi
am looking for someone who has got much the same set up as me to help us oc to least 4.6 on manual oc if they can pass on a template.
i have tried some template's oc over some forums but all seem to be ok for a while. the most oc i have oc is 4.7, ran prime for over 10,12,14 hrs all passed
also used intelburn on max and yet again passed. temps recording at the most highest was 73 on one core.these settings was on 100.0@47 giving me the 4.7 oc. but the problem always start when turning the pc on from cold the following morning i get bsod's and as alway's i had to revert back to stock speed to get into windows,sometimes i have to do system restore's
[email protected] seem to me as ok at 1.33.
not sure if it's ram,cpu,or the motherboard that's causing this problem.
the pc runs ok on asus ai suite auto clock @4.3 but am not happy using asus
bclk freg at 103.0.
anyone got any idea's or a good template settings
cheers

 

[chillidog]

When I got my 2500k the bclk came at 103 for some reason.

Changed that to 100 and multiplier to 45 with my Core voltage set to 1.35

Haven't a single problem with this OC and the temps are great too - rarely past 60C

thanks guy's

robsmith is the rest of your setting's in the bios set to auto ?
if not any chance of posting your bios settings,that will give me something to work on

thx

 

[chillidog]

eep I totally forgot about this thread, I'll shove up my bios settings tomorrow morning/early afternoon for you too.

bump:

any update on bios settings mate

 

[chillidog]

If it would help I'll put up screens from my 4.8 setup, just adjust mp and vcore/offset accordingly, remember all chips are different, some need higher voltages than others.

many thanks pgi947 for your replie back.
would be great if you could stick up screen shot's as this would help us a lot and many more other's that is new to oc with the same set up.

welldone

 

[chillidog]

pgi947

thanks mate so far ok the only thing i have changed is by all cores @ 4.6
for now and things seem to be [email protected] max.temp 69 max
my memory is set @1.6
and prime for 9hrs so far ok. and then am going to jump up to 4.7 and see what happens.

but i want to ask a noob question concerning ssd port.
am a bit confused to which sata port i should have cornected my ssd drive
should it be the grey port or the navy blue port.
at the moment i have cornected it to the navy blue is that correct?
as both ports support 6.0gbs but one is intel and the other is marvall.

don't all laugh at me for asking