Soldato
- Joined
- 5 Aug 2006
- Posts
- 11,428
- Location
- Derbyshire
hi all
this morning my a8n sli se wouldn't post and I had to clear cmos (didnt say cmos failure anywere so don't think its that), then it wouldn't post from my sata2 seagate 7200.10 again. says boot disk failure sometimes if i set it as 1st boot drive in bios.
any ideas why it wouldn't boot this morning?? the cpu is 250x10 @ 1.365v but surely I should still see seething on the screen if this was the problem.
think i just got something somewer set up wrongly as the pc occasionly crashes but never bsod or random resets etc. the pci frequency was set to auto instead of 33.33 (i changed it to this morning) could this be it? i think the motherboard came with latest bios. please help
EDIT: been dual priming for a while so can't be cpu a sit hasn't failed. will continue to prime
this morning my a8n sli se wouldn't post and I had to clear cmos (didnt say cmos failure anywere so don't think its that), then it wouldn't post from my sata2 seagate 7200.10 again. says boot disk failure sometimes if i set it as 1st boot drive in bios.
any ideas why it wouldn't boot this morning?? the cpu is 250x10 @ 1.365v but surely I should still see seething on the screen if this was the problem.
think i just got something somewer set up wrongly as the pc occasionly crashes but never bsod or random resets etc. the pci frequency was set to auto instead of 33.33 (i changed it to this morning) could this be it? i think the motherboard came with latest bios. please help
EDIT: been dual priming for a while so can't be cpu a sit hasn't failed. will continue to prime
Last edited: