Hey guys,
A friend recently bought some upgrades to his desktop (B450-F Mobo, Ryzen 3600x CPU & 2 x 8GB DDR4).
He's not overly technical but attempted to put everything together following YouTube etc. but told me he did have the board resting on the carpet for a few mins
.
I had hope things would be okay, but after powering on, he's getting no display and a few beep fault codes. It's 1 long beep, followed by three short beeps (which the mobo manual suggests is "No VGA Detected"). This occurs with and without the GFX card installed. We tried all of the obvious things (resetting RAM, changing channels, trying just one stick, removing GFX card etc.) but still get the same fault code. When powering on, the monitor light flickers green as if it's detected something for a moment, and then goes back to standby without displaying anything.
Is there anything else we could try? Is there anything else that could cause this?
Any help / advice would be very much appreciated!
Thanks in advance!
A friend recently bought some upgrades to his desktop (B450-F Mobo, Ryzen 3600x CPU & 2 x 8GB DDR4).
He's not overly technical but attempted to put everything together following YouTube etc. but told me he did have the board resting on the carpet for a few mins
.I had hope things would be okay, but after powering on, he's getting no display and a few beep fault codes. It's 1 long beep, followed by three short beeps (which the mobo manual suggests is "No VGA Detected"). This occurs with and without the GFX card installed. We tried all of the obvious things (resetting RAM, changing channels, trying just one stick, removing GFX card etc.) but still get the same fault code. When powering on, the monitor light flickers green as if it's detected something for a moment, and then goes back to standby without displaying anything.
Is there anything else we could try? Is there anything else that could cause this?
Any help / advice would be very much appreciated!
Thanks in advance!
