Help please, new build won't boot

[Agent WD40]

Morning All,

I have been putting my new pride and joy togther but have run into a mild problem. When isntalling everything and pressing the power button nothing happens. Lights are on but no one is home (kinda thing). The setup is as follows;

Point of View GeForce 8800 GTX 768MB GDDR3 HDTV/Dual DVI
Intel Core 2 Quad Pro Q6600 2.40GHz (1066FSB)
Asus Striker Extreme nForce 680 (Socket 775) PCI-Express DDR2 Motherboard
OCZ 4GB (2 x 2GB) PC2-6400C4 800MHz Reaper
Enermax Galaxy 1000W EGX1000EWL ATX2.2 Modular PSU
Western Digital 36Gb raptor HDD

Now, I've installed it all and the lights come on the mobo but when pressing the power button, no boot.
I've changed the RAM for known working RAM, no joy. Be is single stick or both. No joy.
I've checked the PSU on another machine, all works fine.
I have re-seated the CPU, still no joy.

What else can I check or have I missed anything?

Thanks,

Agent.

 

[Agent WD40]

nope - I will check it tonight to make sure she is happy.
Could there be any thing else at play on this one?

 

[Agent WD40]

Sounds like power button connector (from case) is not plugged in or right way round (on mobo header). Refer to both manuals

Could be, but the Mobo has a power button on it and pressing that has no joy either (be it with case connectors attached or not.

 

[Agent WD40]

ok - got some good options here. Will go home over lunch and see what happens. Lets hope I get some joy.

Main points so far;
1) Dodgy gfx card.
2) Faulty mobo / connectors.

Keep the ideas-a-flowing.

Thanks,

Agent.

 

[Agent WD40]

That seems like sound advice there byte. Will give it a shot.

I've also ordered in an entire spare set of kit so as if I narrow it down I'll be able to swap it out for a new one as I cba to wait around for a RMA.

Thanks all.

Agent.

 

[Agent WD40]

Hi all,

I have just swapped the mobo and all the lights came on fine and she booted perfectly. All sorted. Thank you all for your help!

Agent.