Help please!

ziggynerja · 13 Feb 2010 at 15:18

Hi, i just received all the components in my sig.. and have put it all together.

Now i have two problems..

Monitor displays "No signal" and turns off

and

When i press eject on CD tray it will open and automaticly shut by itself... pretty fast.

Any idea whats causing these problems?

ziggynerja · 13 Feb 2010 at 15:29

TW3X4G1600C9D is the RAM i have... im pretty sure its compatible with my mobo :S.. and its all plugged in right.. /cry

ziggynerja · 13 Feb 2010 at 15:30

@Macca stulid ye i tried DVI and VGA

ziggynerja · 13 Feb 2010 at 15:44

not using crossfire atm, just tried resetting bios, and just tried both sticks seperatly..

no luck

ziggynerja · 13 Feb 2010 at 15:45

Do you recon this could have anything to do with the processor..maybe its been moved or something.. because i had a little trouble fitting the cpu cooler..

ziggynerja · 13 Feb 2010 at 15:50

Just realised the gfx card fan is making a pulsing huming sound (thought it was the cd drive at first)..... maybe this is the cause of the problem..

ziggynerja · 13 Feb 2010 at 15:52

yeh clamp through the back.. and yes all power cables connected, including the 8pin

ziggynerja · 13 Feb 2010 at 15:55

Erm, dont know if this is a problem but.. im using a 8pin power cable which came with the powersupply.... to connected the gfx card to the powersupply

ziggynerja · 13 Feb 2010 at 16:04

Im using only 1 card atm..

Yes sorry its a 6 pin connector...

Yes i used stand offs

ziggynerja · 13 Feb 2010 at 16:06

and the fan is spinning.. just sounds like its pulsing

ziggynerja · 13 Feb 2010 at 16:31

"When you reset the bios did you place the cmos jumper back on correct posistion, if it uses one?" Yes

"Pull the power from the DVD drive and harddisk and boot." Tried

hope its not a fault in the graphics card itself

ziggynerja · 13 Feb 2010 at 16:53

Ok ill try, thanks for your time

ziggynerja · 13 Feb 2010 at 17:01

Just found 1 tiny pin bent on the cpu what shall i do!?

edit: bah.. i fixed that but still have the same problem..

ziggynerja · 13 Feb 2010 at 18:45

Fixed it woot

Not too sure how though, i just took everything apart and started again... so i guess something was loose..

Just installing windows now

Ill try get some pictures up of the setup later

Thanks again ppl, espeically stulid!