Help with Air Cooling in Enthoo Pro M

[Zorton_Maverick]

Silly question so apologies in advanced but any help appreciated.

Just built a small gaming PC for the kids consisting of a Phanteks Enthoo Pro M / Gigabyte GA-H110M-S2HP Micro ATX mobo / EVGA 430 W.

This issue I am having resides around cooling. The motherboard I got them only has 1 additional Fan Header on it (excluding the CPU header).
I had bought the Phanteks PWM Fan Hub from here but when I try to power the fans through it whilst it's connected to a SATA power connection, doesn't work.
At the moment, have 2 140mm fans in the case, both being powered by that 1 motherboard fan port using a splitter cable.

Have a number of 120mm Noctua Redux fans I want to use but not sure how to proceed ?
The Fan Hub worked fin on my Z170 when it was being powered directly from the motherboard ?

Am I doing something wrong ?
Final note, the Sata connection I was attempting to use is also powering my Boot SSD Drive.

Thank you.

 

[ak22]

Not used it myself but i think you have to connect the fan hub to your to the motherboard(CPU_FAN), as well as the sata cable.

 

[doyll]

Fan hub has to be connected to motherboard PWM fan header. On our motherboard that is the CPU_FAN header. The Phanteks PWM hub is not a PWM hub, but a PWM controlled adapter hub for 3-pin fans.

 

[AdamScott85]

The PWM fan hub that comes with my Phanteks Primo needs a power cable plugged in as well as the fans and also a cable from the Motherboard. I don't use it because I have fan controllers at the front and tbh I could never get mine working either.

 

[doyll]

I've used several of these and all worked without PSU power. Of course they were using only motherboard header power so number of fan that could be attached was limited.

 

[AdamScott85]

That could be why mine never worked Doyll rofl, I never needed mine anyway. I have 14 case fans so I needed fan controllers anyway. Hope you get it sorted Zorton.

 

[ak22]

nvm