Help with Case and CPU Cooling :)

MarkW7

MarkW7

MarkW7

Permabanned
Joined
30 Nov 2008
Posts
731
Location
Manchester
Hello all,

So i have finally put together my new PC! :D

Motherboard;
MS-7519 MSI Intel P43 Neo-F motherboard

CPU;
E5200 (Dual core - 2.50GHz)

Cooler;
Stock Intel

HDD;
Hitachi 320gb (SATA)

IDE DVD-RW

Case;
******** ACHILLES with 500w PSU

Card;
Some rubbish 32mb PCI for the moment untill i get money for a decent one.

Heres the important part;

Fans;
1x 12cm intake
1x 12cm exhaust (same fan as above)
And the intel cooler.
I have the opportunity to add 2x 12cm fans on the side, one infront of CPU and below this (infront of GPU) Should i add these?
Or i have a 360mm fan and i can just mod the side and put this on :D:D

Some readings off

Coretemp;
Core0 - 43.c
Core1 - 44.c

SppedFan;
Core0 - 48.c
Core1 - 48.c
HDD - 27.c

Are these ok?
Are there any more programs that can help me?

What are good temps and help on cooling

Thanks :D
 
Last edited:
Them temps are just from posting this and having the internet open, they've risen abit to about 50.c from restarting and just opening the internet again
Speedfan says my CPU fan is at 1750 RPM - Is this Normal.
Speedfan is also giving me; Temp1, Temp2 and Temp3 but i dont know what they're for;
1. 36.c
2. 28.c
3. -128.c [Yes minus?!]

Win Power PSU 500w
 
Last edited:
HW Monitor is giving me;

Fan; 1754 RPM

TMPIN0- 36.c
TMPIN1- 27.c
Core0- 49.c
Core1- 46.c
HDD- 27.c

Got RealTemp to work;

Core Temperature;
38.c
39.c

Distance to TJMAX?!
56.c
57.c

Minimum Temps (CPU?)
39.c
39.c

Max Temps.
49.c
50.c
 
Last edited:
I just did a small ftt in prime95 i only did it for 15 minutes because the temps were 97.c and i thought it might damage it.
 
Yeah, an after market would be better, i checked the intel and it wan't even on! So i pushed it in firmly and the temps are now 40idle instead of 50.

Just done a 10min prime test and temps went up like 5.c
 
Last edited:
Thanks :)

Could you take a look at this please?
It only says 1.6 speed?

msc808.jpg


My motherboard is an MSI Neo P43.
 
I've had a look for speedstep but couldn't find it unless its called something else.
I found the multiplier but it said i cant change it above 8 unless speedstep was off - although i can change the FSB.

Motherboard;
MSI MS-7519 P43 Neo
 
I just went ahead and used your link, did loads of downloading - 4 restarts.
Then i could log into windows 7 only XP

Bit of a nightmare but i seem to be there now -

Ran othos for 2 hours no errors and its giving me 2.5GHz! Your a genius :D:)

Unsure what version ect im on in bios as im all over the place but i'll check,
Picture;
Temps are 50's when i stopped it they went to 40's
Any good? - Stock speed's

5nq7ao.png


Oh, if i ever get a new hdd with i have to upgrade the bios again for the new Harddrive and new OS?

Thanks.
Be back soon.
 
You must log in or register to reply here.
Back
Top Bottom