Help with i7 OC

sydeccles · 24 Sep 2012 at 09:14

My set up is
Intel i7-2600k Retail CPU
Gigabyte GA-P67A-UD4 B3 motherboard
Kingston Hyper X 8GB 1600mhz Kit
Noctua DH-14 Cooler

I bought the system it was running at 4.6 GHz,

The PC has been left for several months and not plugged into the mains, anyway came to use it again and the mobo battery was dead, fitted new battery, fired it up and the cmos/bios had to be reset, so I am now back to std - i72600 3.4GHz running at 3.7 GHz.
I have tried and tried to put an overclock back on with a 100% failure rate, I cannot get any overclock to work.
I have tried to follow this, but it does not work for me
http://www.bit-tech.net/hardware/cpus/2011/01/07/how-to-overclock-the-intel-core-i5-2500k/4

ANY help would be appreciated

sydeccles · 24 Sep 2012 at 14:36

Thanks for the replies.

I bought the systen on members market in Dec 2011

http://forums.overclockers.co.uk/showthread.php?t=18347251&highlight=username_Liquid

I will E Mail the guy, see if he can remember the settings

The problem is I am most likely doing or not doing something that is obvious to everyone but me.

sydeccles · 24 Sep 2012 at 14:45

Bluntwrapped said:
As PieEater said above +1

Also, are you manually setting your ram timings and frequency?

So far only trying to change the multiplyer a little,

sydeccles · 26 Sep 2012 at 09:23

Couple more questions

Getting there
Finally got my i72600k to boot with a multiplier of X43 anything more and BSOD

Settings so far
Cpu volts1.3
Memory Voltage - 1.50v
BCLK Base Clock 100

Questions / Advice on the following

Internal CPU PLL overvoltage on Auto ?
Multi Threading Disabled or should I Enable ?
Real time ratio change in OS – Enable or Disable?

Thanks

sydeccles · 27 Sep 2012 at 18:29

Memmory will run at 1600MHz 9-9-9-24 1t with or without XMP enabled & Channel interleaving also Rank interleaving on auto

both settings show 7.8 in Windows Experience Index.
No can do X 46.