Hi guys,
Looking to get this OC further if you can help, prime runs fine upto these settings:
Hardware/Software
Mother Board ( EVGA X58 Classified E-760 )
Drivers ( Default Windows 7 64 Bit )
Bios ( S61J )
CPU ( 920 D0 )
CPU Cooler ( Heat Killer 3.0 Copper )
Memory ( Corsair Dominator GT 1866 7-8-7-20 (CMG6GX3M3A1866C7) )
PSU ( Corsair HX1000W )
GPU ( ATI Radeon HD4890 1GB )
Drivers ( ATI Catalyst 9.11 )
Operating System ( Windows 7 64 Ultimate )
Frequency Control
CPU Clock Ratio ( 20X )
CPU Host Frequency (Mhz) ( 185 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( 3892 @ 21 x 185 )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 100 )
Memory Feature
Memory Speed ( Standard )
Memory Control Setting ( Enabled )
Memory Frequency ( Auto = 1482Mhz )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 11 )
tRCD Setting ( 11 )
tRP Setting ( 11 )
tRAS Setting ( 28 )
tRFC Setting ( 88 )
Command Rate ( 1t )
Voltage Control
EVGA VDroop Control ( With VDroop )
CPU VCore ( Auto = 1.23125 )
CPU VTT Voltage ( Auto = +0 )
CPU PLL VCore ( Auto = 1.800 )
IOH PLL VCore ( Auto = 1.800 )
DIMM Voltage ( Auto = 1.500 )
DIMM DQ Vref ( Auto = +0mV )
QPI PLL VCore ( Auto = 1.100 )
IOH VCore ( Auto = 1.100 )
IOH/ICH I/O Voltage ( Auto = 1.500 )
VTT PWM Frequency ( 250 KHZ )
CPU PWM Frequency ( 800 KHZ )
CPU Impedance ( Auto )
QPI Signal Compensation ( Auto )
ICH VCore ( Auto = 1.050 )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( Auto )
OC Recorvery ( Disabled )
PnP/PCI Configuration
Init First Display ( PCIEx )
Maximum Payload Size ( 128 )
Power Management Setup
ACPI Suspend Type ( S3 )
HPET Support ( Enabled )
HPET Mode ( 64-bit )
But one i go above these on e-leet prime crashes and i get various BSOD any suggestions? Im following the guide on evga's forums but its not very clear.
Cheers
Ulti
Looking to get this OC further if you can help, prime runs fine upto these settings:
Hardware/Software
Mother Board ( EVGA X58 Classified E-760 )
Drivers ( Default Windows 7 64 Bit )
Bios ( S61J )
CPU ( 920 D0 )
CPU Cooler ( Heat Killer 3.0 Copper )
Memory ( Corsair Dominator GT 1866 7-8-7-20 (CMG6GX3M3A1866C7) )
PSU ( Corsair HX1000W )
GPU ( ATI Radeon HD4890 1GB )
Drivers ( ATI Catalyst 9.11 )
Operating System ( Windows 7 64 Ultimate )
Frequency Control
CPU Clock Ratio ( 20X )
CPU Host Frequency (Mhz) ( 185 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( 3892 @ 21 x 185 )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 100 )
Memory Feature
Memory Speed ( Standard )
Memory Control Setting ( Enabled )
Memory Frequency ( Auto = 1482Mhz )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 11 )
tRCD Setting ( 11 )
tRP Setting ( 11 )
tRAS Setting ( 28 )
tRFC Setting ( 88 )
Command Rate ( 1t )
Voltage Control
EVGA VDroop Control ( With VDroop )
CPU VCore ( Auto = 1.23125 )
CPU VTT Voltage ( Auto = +0 )
CPU PLL VCore ( Auto = 1.800 )
IOH PLL VCore ( Auto = 1.800 )
DIMM Voltage ( Auto = 1.500 )
DIMM DQ Vref ( Auto = +0mV )
QPI PLL VCore ( Auto = 1.100 )
IOH VCore ( Auto = 1.100 )
IOH/ICH I/O Voltage ( Auto = 1.500 )
VTT PWM Frequency ( 250 KHZ )
CPU PWM Frequency ( 800 KHZ )
CPU Impedance ( Auto )
QPI Signal Compensation ( Auto )
ICH VCore ( Auto = 1.050 )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( Auto )
OC Recorvery ( Disabled )
PnP/PCI Configuration
Init First Display ( PCIEx )
Maximum Payload Size ( 128 )
Power Management Setup
ACPI Suspend Type ( S3 )
HPET Support ( Enabled )
HPET Mode ( 64-bit )
But one i go above these on e-leet prime crashes and i get various BSOD any suggestions? Im following the guide on evga's forums but its not very clear.
Cheers
Ulti