HELP PLEASE
Overclocking i5 760 on Asus P7P55D
4 gb corsair XMS3 9-9-9-24
-----------------------------------
Dear Overclockers friends...
i'am looking for some fine tuning on my rig
any help and tip about voltages are very,very welcome.
I have tried different overclocks from 3.6 ghz to 4.0 ghz
with speedstep on (turbo boost off)
I want to have the cpu voltage as low as possible to contain temperatures at about 75c.(full load) and below 35 idle.
The voltage setting Info below come from a forum, I hope the friend who wrote it will not mind if I use it here.
..............................................................................
Voltage settings
CPU voltage mode: [Offset]
Offset voltage: [0.09375], results in a maximum/minimum voltage of 1.208/0.968
Offset sign: [+]
IMC/VTT: [1.14375] ~1.45-1.5 read out
DRAM volt: [1.6625] ~1.65 read out
PLL volt: [1.8250]
PCH volt: [1.1]
Load line calibration: [Enable]
CPU speed spectrum: [Enable]
Load line calibration: [Enable]
...............................................................................
1:CAN SOMEONE EXPLAIN THE OFFSET SIGN "+" or "-" ?
IN ORDER TO KEEP VOLTAGES DOWN AND USE THE SPEED STEP SHOULD I APPLY THE "+"or"-" SIGN,(to allow the voltage to go down together with multipliers when CPU is idle) what the difference?
I WANT TO KEEP THE CPU Voltage @1.3000 (MAXIMUM) OR LOWER IF POSSIBLE
2:ABOUT THE VOLTAGES OF
LL,PCH IMC/VTT.DO I NEED TO APPLY MORE VOLTAGES?OR IF I LEAVE THEM AT AUTO,WILL THE MOBO WILL RAISE THE VOLTAGES BY ITS OWN?
ON MY 3.6 AND 4GHZ OVERCLOCK I DID NOT CHANGE THEM AND THE RIG WAS 100%STABLE.
Overclocking i5 760 on Asus P7P55D
4 gb corsair XMS3 9-9-9-24
-----------------------------------
Dear Overclockers friends...
i'am looking for some fine tuning on my rig
any help and tip about voltages are very,very welcome.
I have tried different overclocks from 3.6 ghz to 4.0 ghz
with speedstep on (turbo boost off)
I want to have the cpu voltage as low as possible to contain temperatures at about 75c.(full load) and below 35 idle.
The voltage setting Info below come from a forum, I hope the friend who wrote it will not mind if I use it here.
..............................................................................
Voltage settings
CPU voltage mode: [Offset]
Offset voltage: [0.09375], results in a maximum/minimum voltage of 1.208/0.968
Offset sign: [+]
IMC/VTT: [1.14375] ~1.45-1.5 read out
DRAM volt: [1.6625] ~1.65 read out
PLL volt: [1.8250]
PCH volt: [1.1]
Load line calibration: [Enable]
CPU speed spectrum: [Enable]
Load line calibration: [Enable]
...............................................................................
1:CAN SOMEONE EXPLAIN THE OFFSET SIGN "+" or "-" ?
IN ORDER TO KEEP VOLTAGES DOWN AND USE THE SPEED STEP SHOULD I APPLY THE "+"or"-" SIGN,(to allow the voltage to go down together with multipliers when CPU is idle) what the difference?
I WANT TO KEEP THE CPU Voltage @1.3000 (MAXIMUM) OR LOWER IF POSSIBLE
2:ABOUT THE VOLTAGES OF
LL,PCH IMC/VTT.DO I NEED TO APPLY MORE VOLTAGES?OR IF I LEAVE THEM AT AUTO,WILL THE MOBO WILL RAISE THE VOLTAGES BY ITS OWN?ON MY 3.6 AND 4GHZ OVERCLOCK I DID NOT CHANGE THEM AND THE RIG WAS 100%STABLE.
