help with prommie v2000 mod

[ArchAnGeL]

ok first phase mod so i removed the drive bays etc but now I have a problem...

the hose is on the wrong side!
when looking at the unit from the condenser, all the mods I have seen have the hose rising on the right, through the hole for the psu cables

my stock unit has the hose rising on the left.

how much can I bend it? i dont really want to turn the unit around in the case as that gives me a problem with where to put the psu

what do I do?

a few pics that hopefully illustrate the point

 

[welshtom]

if you bend it too much you will break. You might have to mount it the opposite way.

All machs have the hose like that. You need it to be custom modded if you want the hose on the other side..

Not much you can do im afraid.

Tom

 

[AFK_Matrix]

Only other option is to get dremelling

Basically cut your own hole in the central divider, its not too hard I did a new oblong hole in my divider as I need to route watercooling tubes through the divider.