I'm currently setting up a dedicated streaming rig. It is an mATX build and I already have the following components - an AverMedia Live GamerHD and an i53570K.
I am currently looking at the following items:
Onto the questions:
I'm assuming the AverMedia Live Gamer HD would slot into one of the available PCI-E slots and I could always drop in a graphics card if required as well I believe if needed later on.
Any help on all of this would be hugely appreciated.
UPDATE
Well after a lot of digging around it looks like those Corsair sticks have a 52.5mm high profile so I'm opting for the Kingston HyperX Genesis 8GB (2x4GB) PC3-14900C9 1866MHz Dual Channel Kit - Black/Gold (HX18C9BGK2/8-OC) which appear to have a much lower profile. The Scythe has a 35mm fin clearance so fingers crossed.
I am currently looking at the following items:
- Lian Li PC-V355B Aluminium Micro ATX Cube Case - Black
- ASRock Z77 Pro4-M Motherboard
- Corsair RM Series 450W Full Modular Silent Power Supply 80+ GOLD (PSU)
- Corsair Memory Vengeance Jet Black 8GB DDR3 1866 MHz CAS 9-10-9-27 Dual Channel
- Samsung MZ-7TE120BW 840 EVO 120GB Basic SSD SATA 3 7mm UltraSlim 2.5"
- Scythe SCBSK-2100 Big Shuriken 2 Rev.B Low Profile CPU Cooler
Onto the questions:
- Is the Corsair 450w Full Mod ok for this Lian-Li case?
- The Pro4-M has an HDMI out as well as a VGA out (at least I think it does) so would this be ok to feed to two monitors? (one VGA to VGA and the other using an HDMI to VGA adaptor).
- Will the Scythe provide enough clearance on the Corsair RAM heat sinks?
I'm assuming the AverMedia Live Gamer HD would slot into one of the available PCI-E slots and I could always drop in a graphics card if required as well I believe if needed later on.
Any help on all of this would be hugely appreciated.
UPDATE
Well after a lot of digging around it looks like those Corsair sticks have a 52.5mm high profile so I'm opting for the Kingston HyperX Genesis 8GB (2x4GB) PC3-14900C9 1866MHz Dual Channel Kit - Black/Gold (HX18C9BGK2/8-OC) which appear to have a much lower profile. The Scythe has a 35mm fin clearance so fingers crossed.
Last edited: