Help with ripjaw x and MSI P67A-GD65

rchads89 · 19 Jan 2011 at 00:16

Im trying to set my ram to the correct values but as soon as i do something to the ram my pc fails to post it trys 4 times and then the 5th time it will come up overclocking failed run setup etc etc.

I have the ram installed in slot 1 and 3.

and

Currently there @ 9-9-9-28 @ i think would be 1.50v. ( default whatever the board has set them at )

The ram kit i have is this one:

http://www.overclockers.co.uk/showproduct.php?prodid=MY-058-GS&groupid=701&catid=8&subcat=1517

i did get the ram to work on the UD7 at rated timing and voltage. But on this board its far too confusing for me.

So were do i put the values and what do i need to change?

Thanks

rchads89 · 19 Jan 2011 at 03:14

I think i have a break through this motherboard HATES CAS 6 !

I have also had to change the voltage on the ram aswell =/

Might aswell saved some money and bought another kit lol

bro306 · 19 Jan 2011 at 08:41

The motherboard ok using cas 6! try just upping the voltage to 1.65v!

rchads89 · 19 Jan 2011 at 13:25

well i have them set at 7-8-7-24 @ 1.55v that will do sod it.

Dont understand why they dont work @ rated speed though as g-skill said they have tested them @ that lol.

Sprungheels · 19 Jan 2011 at 17:45

Got the exact same problem.
When the ram set to defaults everything is fine. Soon as I set the timings/speed no go.
Seems to just be a cold boot error so maybe this ram doesnt work with this board?

Msi P67a-GD55 bios 1.7 Gskill Lockjaws X 2x4gb 1.5v