Hi Everyone,
I have just successfully upgraded my rig to Core2 goodness, I have the following:
Asus P5B Deluxe (wifi) Bios 1004
Conroe 6600
2gb Corsair DDR800 6400 (4:4:4:12)
Tagan 580W
My problems encountered so far seem to be ones that quite frankly I didnt expect from such a decent bit of kit.
For example, upon installing windows and all my usual crap on there I noticed the sound was crackling from the speakers, an updated driver from Asus seems to have solved this.
Secondly, navigating between folders seems to be slow and laggy, I simply dont have the fluidity I had with my old Athlon 4400 X2.
Thirdly, the temperature of the cpu with the side panel off runs at a nice 34C, Arctic Silver 5 was applied to the stock cooler (paper thin layer on cooler and then a to the centre of the cpu, sized of a single grain of rice) however, with the side panel on it runs between 43-47C idle! Is this typical? Bearing in mind that I have a Coolermaster aluminium case. I am also using the Asus Ui utility to give me the readings.
I wish to overclock to at least 3.0GHz if possible so with idle temps that high, can anyone advise me what I should be looking for temp wise, obviously the lower the better but as a rule of thumb what is typical?
Is there a nice easy guide to ocing using a Asus P5B...and will my memory be able to do this? I am confused as to the FSB 1:1 ratio and what this means.
Lastly, do Conroes run better at 2T or 1T?
Thanks for any help,
emissary
I have just successfully upgraded my rig to Core2 goodness, I have the following:
Asus P5B Deluxe (wifi) Bios 1004
Conroe 6600
2gb Corsair DDR800 6400 (4:4:4:12)
Tagan 580W
My problems encountered so far seem to be ones that quite frankly I didnt expect from such a decent bit of kit.
For example, upon installing windows and all my usual crap on there I noticed the sound was crackling from the speakers, an updated driver from Asus seems to have solved this.
Secondly, navigating between folders seems to be slow and laggy, I simply dont have the fluidity I had with my old Athlon 4400 X2.
Thirdly, the temperature of the cpu with the side panel off runs at a nice 34C, Arctic Silver 5 was applied to the stock cooler (paper thin layer on cooler and then a to the centre of the cpu, sized of a single grain of rice) however, with the side panel on it runs between 43-47C idle! Is this typical? Bearing in mind that I have a Coolermaster aluminium case. I am also using the Asus Ui utility to give me the readings.
I wish to overclock to at least 3.0GHz if possible so with idle temps that high, can anyone advise me what I should be looking for temp wise, obviously the lower the better but as a rule of thumb what is typical?
Is there a nice easy guide to ocing using a Asus P5B...and will my memory be able to do this? I am confused as to the FSB 1:1 ratio and what this means.
Lastly, do Conroes run better at 2T or 1T?
Thanks for any help,
emissary
Last edited: