help

[Quronos]

HELP WITH E6300

Hi all

After a couple of weeks of messing about I finally got my Freezer Pro 7, but I cant say ive noticed any difference in temps.

Im still getting 50 at idle and for some reason it still seems to lower its speed from 1.86ghz to 1600ghz which results in a 2 degree drop in temps

any ideas anyone cause this is doin my head in now!

 

[Quronos]

The CPU-z screen and the TAT screen can be seen or by clicking these:
cpu-Z
TAT

 

[Quronos]

I cant find any thing in my bios that says step speed. Could it be called anything else?

I have two fans blowing in from the side, both 60mm
I have 1 fan sucking air out that the roof of the case also 60mm and a 120mm behind the freezer 7 sucking air out.

No offence taken, Yes i did clean the cpu before i installed my new kit.
I was hoping my temps would drop dramatically with the freezer 7 pro but its just not happened.
Clicky if photo doesnt work

 

[Quronos]

I watched the fan and the temperature, it seems to start up at about 38 degrees and seems to stay constant.

I will have another look in a bit for the fan control thingy in the bios

 

[Quronos]

taa very much

i'll turn it off and see if it makes a difference


.....




Edit:

Turned it off, and TAT isnt changing the frequency any more.
Temp is 50 at idle now

 

[Quronos]

60 ish

 

[Quronos]

ok, ive taken the side panel off and whacked it by an open window. The temp has fallen to 45 at idle which is a lil better but still quite warm for 1.8ghz