Help

Associate
Joined
3 Jun 2010
Posts
75
Hi All,

System spec, Intel 4670k, Corsair 8gb drr3 low profile, msi r7950 3gb twin frozr, Ssd Corsair 120gb force gt, 2 hdd's I think Samsung, Corsair h90 cooler AIO

My previous MB Gigabyte z87n wifi - problems won't boot, tried two different psu's, removed ram, removed gpu, removed cpu, no fans spin nothing what so ever. If you leave the power cable unplugged for serveral hours, plug it back again it will boot fine, but if you shut down, it will not power up what so ever, no fans spin, nothing

So I thought I would upgrade to a Atx board, same rig, new mb Asus z97 pro.

Now I am getting the same issue again with my new Mb. The new mb does the check with lights all over the board once I finally get it too boot that is, it sounds a odd problem but I'm seriously stuck with what's causing this problem

If anybody can help as I'm pulling my hair out and a slight rage is building


Cheers again
 
Last edited:
Going to try a different cpu tomorrow as I don't have another 1150 socket cpu, but a friend of mine does.

I tried it without the hdd plugged in and removed power from them, still the same. Didn't unplug Ssd though but will try that next

Any other suggestions?
 
Hi, i have tried most of the suggestions above, I have a different case as well, so cant be the power button itself, the problem started above 2 months ago, i had bent cpu pins in my old gigabyte board, so must have caused damage to the cpu over time, the gigabyte board must have had weak pins or a over tightened cpu cooler, however i think it was weak pins or a manufacturing defect, as a few of the pins were missing.

I have changed power supply cable same effect

Tried a whole different set of ram same effect
 
Back
Top Bottom