High temp? (image inside)

Associate
Joined
29 Nov 2004
Posts
349
I overclocked my e6600 to 3.6 on air, using this guide..
http://evga.com/forums/tm.asp?m=61146

Been running fine so far, but temperatures worry me, check out the overclock and tell me if its ok?

speedfaniw0.jpg


cpuzws5.jpg
 
"Torture Test ran 3 minutes 40 seconds"
Orthos failed, gets to 71c, time to underclock?

How about my overclock, are the ram timings ok etc?
 
Last edited:
Reduced from 1600FSB to 1500.
Orthos didn't halt this time (see below), but reached 78c, should I underclock more?

orthoshh8.jpg
 
Last edited:
Reduced vcore from 1.4/Auto gradually to 1.325, failed straight away in Orthos.
So put it from 1.325 to 1.35, ran for 10 mins at 68c, ~10c lower than before.

135vra2.jpg



Update: Orthos just stopped at 15mins, but temperatures were the same, is this good enough?
 
Last edited:
Seems stable at 3ghz. I'm happy with that, also some extra cooling could get twice as good overclock. Results below, thanks for help guys.

1333idlelh3.jpg


1333loadoa6.jpg
 
Last edited:
Back
Top Bottom