High W/C temps
- Thread starter Sayso
- Start date
I have same vcore aswell for my overclock, I have moved my case now from below the desk, to on top of a set of drawers, a little cooler but not much.
I dont think I have any choice but to mount the rad on top of the P182 that way the fans wont be fighting with the rear exhausts for air.
Anyone done this mod?
Sorry for hijack but its all on same subject.
I dont think I have any choice but to mount the rad on top of the P182 that way the fans wont be fighting with the rear exhausts for air.
Anyone done this mod?
Sorry for hijack but its all on same subject.
I have the Dtec Fusion 2 pump for my setup with a Quad core insert. Is there a right and wrong way to fit it? thanks guys.
Abit IN932X-MAX Mboard, Intel 6850 Quad Core Extreme
OCZ PC2-6400C5 Dual Channel Vista Gold Series Ram 8Gb
2 300gb sata Hard Drives, 2 NEC DVD re-writer drives
1 Samsung 1TB spinpoint hard drive
Coolermaster 1000W PSU, x2 BFG 8800GTX Overclocked and Watercooled
Thermochill 3 Fan Rad + Laing Pump with XSPC clear top + XSPC Drive Bay and 1/2" Tygon Hose running 2 GPUs
Thermochill 1 Fan Rad + Aquaero Pump + Aquatube Res + 10mm Hose running CPU
All controlled via Aquaero monitoring system running Vista 64bit
Samsung T260Hds x3 using Matrox TH2GO
Logitech Z5500 Speakers
Logitech MX5500 mouse,G15 keyboard and G25 Steering Wheel
Abit IN932X-MAX Mboard, Intel 6850 Quad Core Extreme
OCZ PC2-6400C5 Dual Channel Vista Gold Series Ram 8Gb
2 300gb sata Hard Drives, 2 NEC DVD re-writer drives
1 Samsung 1TB spinpoint hard drive
Coolermaster 1000W PSU, x2 BFG 8800GTX Overclocked and Watercooled
Thermochill 3 Fan Rad + Laing Pump with XSPC clear top + XSPC Drive Bay and 1/2" Tygon Hose running 2 GPUs
Thermochill 1 Fan Rad + Aquaero Pump + Aquatube Res + 10mm Hose running CPU
All controlled via Aquaero monitoring system running Vista 64bit
Samsung T260Hds x3 using Matrox TH2GO
Logitech Z5500 Speakers
Logitech MX5500 mouse,G15 keyboard and G25 Steering Wheel
Oh yeah, sorry I didn't see it had been mentioned already. What about turning the fans around or putting them on the other side of the rad so that all of the fans in that section of the case are working in the same direction?
Maybe you've just got a slightly hotter Q9550. I would have thought that 1.37vcore is quite high for a Q9550?
well i turned the fans around and shortened the looping and lost 10C, in full speed mode hyper fan testing priming it barely gets into its 50s on small FFTs, even in super silent mode games only hit about 45C so im well happy
.it seems because my RAD was pushed up against the not great grate the air wasnt escaping fast enough causing the cooling to be comprimised, now i have air being pulled through the RAD
