Home Network & Office Network Problem ?

Bouncy

Bouncy

Bouncy

Associate
Joined
6 Feb 2004
Posts
270
Location
Ballymena
Hi all, i have a Wireless Laptop (Windows XP Professional Edition) and i have a Wireless Netgear Router at Home and also One in my Office, The Office Network is part of a small industrial Estate who all share broadband via a lan point in each of the office walls, to setup my laptop to work in the Office i have to do the following:


Control Panel > Network Connections

In Network Connections it shows my Etherner Port Disconnected as it is supposed to be.

It Shows my Netgear Wireless Card, I right click this card and select

Properties > General > Internet Protocol (TCP/IP) > Properties

Here i have to change the settings to:

Use the following IP address & Use the Following DNS addresses

Here i input the details given by the Business Centre Management and everything works great !!!!

When i get home i can no longer acces my home network because i have changed the settings of the wireless card as explained above and the only way round this is to changed the Internet Protocol (TCP/IP) Settings back to the way they were, setup as Automatically ???

Is there a way round this so i can have the one wireless card configured for both Networks without the silly procedure i'm doing to allow me to access them both ?

Many thanks in advance
 
Because the Broadband is setup via the HQ in the Business Centre every Office has been given it's own IP addresses which can't be changed :( i know in Vista i can setup as many different configurations as i wish and select which 1 i need to use at any particular time and it works perfectly (But Vista is only in BETA at the minute) but i have no idea how to do it in XP ?
 
thanks for that, i'll give it a go ! why can't there be an easier way to do this for e.g. when i go into network connections where it lists all the ways i can connect to networks, when i see my netgear wireless card listed why can't u create more listings of the same card but allowing you to have different configurations for each one listed, when one isn't in use you can right click and select disable for e.g. Netgear Wireless Card 1 Netgear Wireless Card 2 Netgear Wireless Card 3 etc etc........... all the exact same card but each setup differently depending on which network u r joining, the one required will be enabled automatically disabling the rest ! what do u think ?
 
i know i use DHCP at home which allows auto assigned IP addresses, I think it's setup as it is so they can limit how many machines per office, dunno maybe i'm wrong?
 
You must log in or register to reply here.
Back
Top Bottom