How Do I Turn My 4400X2 System Into A Video Encoder Rig With CPU/RAM Clocks?

sagaboy2 · 6 Feb 2006 at 15:26

Ok current clocks are as:

4400X2 @
2420.1Mhz
X11 Multi
FSB 220MHZ

Corsair 1GB Pro 220Mhz 2-3-2-6-8 Timings

Ok I can get the CPU to about 2.6 but then the system isnt quiet but im up for a week of no sleep to get this done.

I need to decode some videos ASAP

Of 66 parts to encode takes 4hours to do in blocks of 7.

Which are better settings to go for. Higher Mhz on the CPU is simple but should I go for higher RAM speed or tight timings?

Quick reply if possible thanks.

sagaboy2 · 6 Feb 2006 at 15:47

Got ya, ill set up settings in BIOS, on for Gaming and one for encoding.

sagaboy2 · 6 Feb 2006 at 16:20

Ok got it @ 2.64 1.47v

240 x 11

RAM 2.5-3-3-8 1:1 ratio

Well see how it goes.

sagaboy2 · 6 Feb 2006 at 18:46

Oh also turned off 1T, upped the RAM to 1.7v (1.8v actual)

Seems to of taken about 1.30 hours of my time, not bad.

Running at 48C one core under load, silent fan speeds. so in all not bad. Seems to run at lower volts after about 2 months running at 2.4Ghz with max load.