how often should i change my feser coolant

subaru_swift

subaru_swift

subaru_swift

Associate
Joined
28 Oct 2006
Posts
391
Location
stoke on trent\bromsgrove
well folks i have used this coolant in my pc for all most 2 years now !.
& my temps have gone up a bit, so maybe it is time for a strip down & clean out.

so how often should i change my feser coolant ?, or better still is there anyone near stoke on trent who can help me make my water cooling lope better, as i have a pigs tail & that what needs sorting out.

but i am too worried to try it my self, plus i have a new wc block for the 280gtx what needs installing too.

any takers, but you must be good at WC........ ( as i will be paying you ! ).

thanks

i7, 920 cpu clocked to 3.60, asus p6t deluxe oc palm edition, 6GB corsair xms3 pc3-12800c9 running at 1604 MHz, zotac geforce gtx 280 amp 1024mb gpu Stock speeds, modded coolmaster master rc-1100 cosmos s case Water Cooled, enermax galaxy 1000w psu, along with 3x 500GB WD drives 1 for xp pro 64 bit sp2, 1 for vista ult, 1 for W7 ult ( action pack release ), & a 1TB WD drive for back ups & some music.using a hp lp2475w monitor.
 
Last edited:
2 years are you crazy.Especially with Feser,it will take you fair bit of time to clean all the blocks and rad.It's not easy at all.
 
whoops

if it is that bad & someone can help i will get some new hardware to cool with & do it right...:).

as this wc is a dark art to me still, so any hands on help with my pc would be great.
 
my water cooling specs =

Swiftech GTZ with i7 Mount
Black Ice GTX 360
XSPC Dual Eye Ball Bay Reservoir
EK FC-280 ( YET to be fitted ! )
12V Laing DDC-1T Ultra (x2)w/Dual Water-cool Power Pump Top
12x 1/4" BSPP - 1/2" ID - 3/4" OD Compression Fitting
1/2" ID - 3/4" OD Clear Hose
2x Feser One Cooling Fluid - UV BLUE
 
Disconnect mobo,graphic card.Drain loop.Mix vinegar with destilled water, and fire up loop.Leave it for couple hours.Dissasemble everything clean block with ketchup.And then everything with warm water.Should be ok.
 
Get it out and leave it out. Feser one is infamous for breaking down and clogging up blocks. If you want colour use coloured tubing. De-ionised water and either a silver kill coil or Primochill Liquid Utopia is the safest option.
 
ok folks thank you, i will not use it again plus the colored tubs sounds like a better plan.

just need someone close to stoke on trent or bromsgrove to give me a hand... ( i will pay ).

thanks
 
jaffveyda said:
2 years are you crazy.Especially with Feser,it will take you fair bit of time to clean all the blocks and rad.It's not easy at all.
Click to expand...

I did and the liquid is the same as when installed when I stripped my blocks they where spotless

Mind u I have mixed it with water so wondering if that's helped

What problems have people had with the fessor one liquid
 
jaffveyda said:
Disconnect mobo,graphic card.Drain loop.Mix vinegar with destilled water, and fire up loop.Leave it for couple hours.Dissasemble everything clean block with ketchup.And then everything with warm water.Should be ok.
Click to expand...

best way. but i use hp sauce more acidy so its a little quicker

just buy some distilled water and use something like Primochill Liquid Utopia as mentioned
 
You only need to change your feser coolant once during the life of the product, preferably before it goes anywhere near you loop :)
 
You must log in or register to reply here.
Back
Top Bottom