Morning all, looking for some advice on my set up so what I currently have set up is.
7950X3D
Asus x670e none wifi
64gb (4×16gb) corsair vengeance 5600mhz cl36
3× 4tb nvme + 1× 2tb p3 plus NVME
4090 Strix oc
Ax1600i
Cooling has 4x 140mm noctua 3000rpm industrial fans in the cases
Cpu is cooled by ek velocity block with mx4 paste and hooked up to a alphacool 2x5.25 bay res and d5 pump with a monsta 540x180x86mm radiator with 3x silversone 180mm air penetrator.
This is all installed in my loft eves and draws air from out side through the rad and there is a extract out the gable wall same with the pc.
So my idle temps are between 23-28 on both cpu and gpu. I was messing about with r23 last night and at 1st was only hitting about 29k but a reset bumped me up to 36k which seems like where it wants to be.
Now the issue comes with I have never overclocked or underclocked a x3d part but I feel this set up should have a lot of potential but due to having 64gb of ram everything I restart it does some memory training I assume and takes about 1 minute before it hits the bios?
So to save lots of Time and also its a right pain to go and reset the bios what sort of settings will net me both good gaming performance and all core rendering, I've enabled PBO already and downloaded ryzen master. But personally I don't like changing bios settings in Windows (just call me old skool) lol.
Anyways thank you for reading my post any help would be appreciated
7950X3D
Asus x670e none wifi
64gb (4×16gb) corsair vengeance 5600mhz cl36
3× 4tb nvme + 1× 2tb p3 plus NVME
4090 Strix oc
Ax1600i
Cooling has 4x 140mm noctua 3000rpm industrial fans in the cases
Cpu is cooled by ek velocity block with mx4 paste and hooked up to a alphacool 2x5.25 bay res and d5 pump with a monsta 540x180x86mm radiator with 3x silversone 180mm air penetrator.
This is all installed in my loft eves and draws air from out side through the rad and there is a extract out the gable wall same with the pc.
So my idle temps are between 23-28 on both cpu and gpu. I was messing about with r23 last night and at 1st was only hitting about 29k but a reset bumped me up to 36k which seems like where it wants to be.
Now the issue comes with I have never overclocked or underclocked a x3d part but I feel this set up should have a lot of potential but due to having 64gb of ram everything I restart it does some memory training I assume and takes about 1 minute before it hits the bios?
So to save lots of Time and also its a right pain to go and reset the bios what sort of settings will net me both good gaming performance and all core rendering, I've enabled PBO already and downloaded ryzen master. But personally I don't like changing bios settings in Windows (just call me old skool) lol.
Anyways thank you for reading my post any help would be appreciated