How to safe OC 5600X? Is safe to push PBO? Or just Curve Optimizer?

[Fefolino]

Hi all!
I have a B550 Gaming Plus, 5600X and a Dark Rock Pro 3
I looked for some tutorials and I found this simple thing to do
- Advanced PBO, Scalar X1 (because at X10 it increases voltage), start with Boost Frequency +0. With Ryzen Master pump up PPT, TDC and EDC until under stress they stay at ~95%. Set Curve Optimizer at a negative value, set it at the lowest possible for all cores, when a core crashes increase the value for that single core.
Well, it seems pretty simple, but I have got a question
Using Cinebench I reached PPT 115W, TDC 70A and EDC 130A and Ryzen Master says that the CPU sits at 1.36v, isn't that too high?
Then, I tried Prime95. With Prime95 I was limited by the PBO values so I increased them even more, and it reached 1.3v
Isn't this voltage too risky? What should I do to have a safe overclock? Is PBO really safe to use?
I keep my temp at max 80C during benchmark.
Thanks!

 

[Fefolino]

voltages matters but depends on the current. its the current that kills the CPU not voltage, idle you could see up to 1.5V on ryzen but its the amount of current that kills the CPU

idle voltage will always be high
load voltage will drop

my 5900x has curve optimizer of -20
mine sitting between 1.081-1.475V

load it sits at 1.2

Thanks for your answer
Yeah, sure, but mine reaches 1.3v even with Prime95, and with cinebench it reaches 1.36v
And I repeat, the settings are PPT 115W, TDC 70A, EDC 130A, Scalar 1X, Boost Frequency +0, so I didn't touch voltage settings
Should I tweak PPT, TDC and EDC so that under Prime95 it stays at 1.2v? And under cinebench?