How to wire guitar with 4 way selector and push pull ?.

[the-sampled_inc]

Thought I might ask this here after seeing this old post. https://www.overclockers.co.uk/forums/threads/guitar-wiring-help.18731300/

Recently got a few upgrades for my telecaster with the intention of putting the pickups out of phase with a 4 way selector switch and also splitting the hotrails bridge pickup into a single with a push pull tone pot.

Push/Pull = split hot rails

position 1 = Bridge

position 2 = bridge/neck in parallel

position 3 = neck/bridge out of phase

position 4 = neck


I have flipped the control plate and pots to get the volume closer to the play area and the selector switch further away. I have taken a diagram of of an image search and removed the wires in paint then moved the pots and flipped the switch so it matches the layout I currently have. the third wire on the neck pickup has been added also.

If anyone here has a clue how to wire this up or could point me in the right direction it would be a massive help.

Here is the Diagram.

 

[the-sampled_inc]

looking on the website you provided there is no diagrams for the wiring I am after. I might need to research if it's even possible

 

[the-sampled_inc]

I might have to go for something like that instead. Going to try and make it work with the hardware I currently have first. Will take the CTS volume pot into consideration.

 

[the-sampled_inc]

I was only planning on having the humbucker split anyway.

would having 2 pushpulls be able to achieve the same configuration I am after. Being able to split the humbucker with one and put the pickups out of phase with another?