HP G62 - No Boot

Associate
Joined
16 Oct 2008
Posts
36
Location
Suffolk, UK
Hi,

Having a problem with a friends laptop and I wondered if you guys could help.

The laptop originally had a fault where the screen would have a blue hue. I took it apart and diagnosed the screen cable as being faulty (reseat the cable and hold it at the right angle and it goes away). I put the laptop to one side and ordered a new cable.

The cable arrived last week, turned on the machine and now it doesn't boot. No display (either on the screen, or when connected to an external monitor), not even the POST stuff. Fan comes on at full speed, then slows down. Caps lock key illuminates as normal but does not flash or anything. After maybe 10 mins it just shuts off.

The laptop is currently largely disasambled on my desk.

I've tried a CMOS reset, and removing the memory (which gave me a flashing Caps Lock light but nothing else). Any ideas?

I suspect the laptop has been dropped at some point as the casing is showing cracks. I've also noticed when connected to the mains a faint "clicking" can be heard coming from the motherboard. Sometimes.


Laptop is an HP G62-a28SA (specs here - http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02433089&tmp_task=prodinfoCategory&cc=us&dlc=en... )
 
Apologies if this sounds disparaging on your PC know-how but are you sure the clicking is coming from the motherboard? 100% of cases of 'clicking' that I have encountered originates from the Hard Drive - assuming this laptop has a mechanical one a number of drops could spell doom for a HDD of this sort.

Just a suggestion, if you think it might be this swap the HDD out and go from there.

Hope this helps.
 
It does it with no HDD connected and when it's off. I don't think it's the hard drive.
 
Back
Top Bottom