HT Link on A8R-MVP??

Modjo

Modjo

Modjo

Associate
Joined
10 May 2007
Posts
655
Location
Telford
Asus A8R-MVP MB
2x1gb 4-Layer V-Data PC3200 DDR SDRAM
Mercury EP-4500 500w (its a lie i tell ya!! ) PSU
AMD Athlon 64 X2 3800+ (939) Manchester Core
AI Overclock - Manual
CPU Freq - 240
PCIE Freq - 100
FID/VID Change - Manual
Proc Freq Multiplier - x10
Proc Volt - 1.375
DDR Volt - 2.7
PCIE Volt - +1.20v
HT Link - 400MHz
DDR Clock - 400MHz

With these settings in place, what should my HT be? Should I leave it as it is?
 
Use CPU-Z to identify the HT in Windows, if you're overclocking the HT link increases with the FSB. Ie at stock in BIOS it's set to 1ghz, but when I overclock I set it to 800mhz. In Windows CPU-Z shows HT is close to 1ghz
 
CPU-Z shows that I'm currently running 480.2MHz with Bus @ 240.1. So I should go back into BIOS and up it manually to 800?
 
Ok done that, HT now showing 900.3. But my core speed has dropped a little to 2250? Do I need to adjust that aswell?
 
I do actually. Think I read about the affects of it a couple of days ago. Will this affect the settings by having it on?
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom