• Notice regarding image hosts and attachments. See here.

HTPC build

Associate
Joined
31 Oct 2012
Posts
290
Hi there,

As some of you may know, I've slowly been gathering the components for a HTPC. Progress has been slow, mainly due to time/work constraints. Poor excuses perhaps but there we go :)

Anyway, I have the following components:

Processor - i7 3770k (got it from work for cheap, couldn't resist and I know it's overkill)
Heatsink - Scythe Big Shuriken 2
Memory - Hyper 2 x 4GB
SSD - Samsung M4 256GB

I'm stuck on the case/motherboard combination. Mainly because I'm really looking to purchase either the Silverstone GD07/08. People have recommended the Asus P8Z77 - M Pro which I quite like the look of but it doesn't have wireless capability. Any suggestions please?

To give you a better idea of what I need this for, the main requirements are as follows:

- As quiet as possible. This really is quite an important factor. The Mrs will go crazy if it's loud in any way! :rolleyes:
- 1080p Blu Ray playback and video streaming - Netflix/Lovefilm etc
- Virtual server environment (MySql install, VmWare etc). Ubuntu/Win64bit install. (I realise I need more memory for what I want to accomplish here, that can come later - I just want to get it up and running for the time being).

I'm going against getting a dedicated video card at the moment. Mainly to reduce noise. I'd like if possible to be able to add this in the future and have my sights set on a 7850. This can come later though.

In terms of power, I was going to get the Corsair 580 Modular but this is no longer in stock. Could someone please recommend a suitable alternative. I'm guessing the build won't need much in the way of power. Noise is a factor too.

Thank you in advance. Look forward to hearing some suggestions.

David
 
Last edited:
Thank you for the suggestions.

I've never seen those pics of the GD07. It looks huge (as in tall). I'm guessing the GD08 is just as tall. Hmmm, think I may have miscalculated somewhat on case size. At over 17cm tall, this might be a little big...

Thanks for the suggestions on the motherboard and PSU.
 
To widen the choice of potential cases I could use, I'm thinking of swapping the Scythe for the Antec Kúhler H2O 620. I think the Scythe may also limit the addition of a gpu on some motherboard as well.

This is tough :(
 
Thanks Idleman,

I believe the SCythe will still fit in the Silverstone Milo, though with it's stock fan, which is fine. I'm not sure I'd be able to get a 7850 in there though? Unless they do them in a low-profile variety?

Thanks for your help.
David
 
Sorry mate, I`ve been including that case in a few HTPS`s lately, but none required a Gpu, so overlooked the low profile spec.
Where exactly will the case be placed, on the floor or in a TV cabinet?
If the latter, what dimensions do you have, to play with?

No problem. I did wonder!

It's going into a cabinet. Dimensions I have to play with is as follows:

Width - unlimited (well, over 50cm)
Height - 177mm
Depth 450mm

I'm thinking about going back to the original Silverstone case I looked at, the GD06. It'll fit. 3 in stock, under £100. 3 x 120mm fans included (though these might have to be replaced) What's not to like?

Only choice now is the motherboard. I'm literally going round and round in circles with this one. My problem is I want to use the Scythe Big Shuriken 2. This causes limitations in that it can cover ram slots (though shouldn't be an issue with my low-profile Hyper memory) and more importantly the PCI slot.

Integrated WIFI now isn't essential, I can buy a USB adapter or something to get around that.

It's just finding a motherboard that will house the scythe and allow for expansion later on down the line where graphics are concerned.

I appreciate your help

David
 
Tbh, I would be surprised if the Shuriken covered the Gpu slot. From what I have seen, there is quite a bit of clearance from the edge of the cooler to the slot.

Thanks for this.

Do you foresee any problems with the following setup in terms of compatibility and being able to fit into the GD06?

Asus P8Z77 -M Pro
Scythe Shuriken 2 Rev 2

and somewhere down the line, a 7850.

Cheers
David
 
Do you need a sli/xfire mobo?

YOUR BASKET
1 x Asus P8Z77-M Intel Z77 (Socket 1155) DDR3 Motherboard £89.99
Total : £99.89 (includes shipping : £8.25).


Nope. Won't be needing to run one more than the 1 gpu. I'll look up the specs of the P8Z77-M against the M Pro, if that's the only major difference you've just saved me £10 :)

Origenae is the case of the past, present and future. timeless design. Buy it

Wow :eek: Too bad it completely blows my budget out of the water! Awesome looking cases though.
 
The rest is ordered:

Asus P8Z77 - M
Corsair Builder 500w modular
Silverstone GD06
Arctic Silver 3 thermal paste

If anyone is interested I'll keep.this thread updated with the build progress.

Cheers


Posted from Overclockers.co.uk App for Android
 
A quick question if I may. For the time being I won't be using a dedicated GPU. I've been led to believe the graphics integrated with the i7 are more than capable of handling HD video content. Is this the case?

Also, where the onboard graphics are concerned, do I simply disable these in the bios from the start? Or should I disable the graphics on the processor instead and use the onboard ones?

Or (and this is completely likely) am I getting things completely wrong and I don't have to touch a thing :)

Thanks

David
 
Well, it's done and I must say I'm quite happy with the results.

Here are some pics and a brief outline of how it was all put together:

Some goodies came :)

goodies.jpg

moregoodies.jpg


I put some memory into a motherboard:

asus.jpg

memoryin.jpg


and took the case out of it's box:

caseout.jpg


Really pleased with the case choice, there's loads of room for tucking your cables out of the way etc:

caseroom.jpg


I assembled the Scythe:

Scythe.jpg

Scythebuild.jpg

Scythe2.jpg


and installed it onto the Asus:

Scytheon.jpg


Just enough room for a graphics card later on:

pciroom.jpg


Installed the PSU, I had to take the hot-swap drive cage out of the case to accommodate the modular cables of this PSU:

PSUin.jpg


A picture of the motherboard with the Scythe, 120mm stock fans and memory:

motherboardin.jpg


Switched her on and:

boot.jpg


Really happy with the GD06. I'm currently trying to see if a card reader will fit in the front of the case where the hot-swap facility used to be. I'll also be painting the key lock black so it matches the rest of the case.

Thanks to everyone who commented and gave me parts advice etc, grateful for your input.

I'm off to play with XBMC some more :)

Thanks
David
 
Looks very nice mate.
Now you can sit back, put your feet up and enjoy.:D

Not just yet I'm not! I have the memory to configure (it's still running @1333 instead of 1666) and XBMC to mess around with. Then there's the case fans to replace (they're not loud but I can get the noise down more I'm sure).

Very nice :) The lock on the front of the case spoils it for me though!

I feel exactly the same, hence why I'm painting it black. It really ruins the smooth looks of the front of the case. I may even try and remove it altogether and but something in there to block it up. A rubber bung or something, not sure yet.
 
Back
Top Bottom