• Notice regarding image hosts and attachments. See here.

Humming...

Caporegime
Joined
25 Jul 2005
Posts
28,857
Location
Canada
Random thread of the day (probably)....

So my sister compains about my computer "humming" in her room (next to mine) when she is in bed, which means I can't use my desktop after about 11pm. It's not her making it up either, there is an audiable hum when on the landing too, which is very strange as my PC is actually very quiet (spent a lot of time and *money* to make it quiet), to the point it is almost inaudiable during the day when sat next to it (nexus etc fans and a Lian Li B25 case).

Now the only thing I can think it is is actually vibrations rather than noise as such, which i need to figure out how to remove. The case sits on a plinth that sits on a wooden floor close to the dividing wall, which could be the main reason for the noise.

So to remidy it I was thinking about maybe sitting the PC on top of a 1" foam bed? If I can't remidy the noise I may have to put the components back in my old case (an Antec P150) and see if that makes any difference, as it's heavy Steel, not light Aluminium.

Any other suggestions or thoughts on this problem?
 
Good idea, that may be a workable plan, and look nicer to boot.

Just nabbed a photo I took the other day from the show your desk thread to show what I was talking about location wise.

img1588w.jpg


The PC sits on a 1" MDF board, which sits on a 1.5" MDF board (to make the seperate PC and shelves easily removeable).

I am just wondering however if all the very dense material underneath it is one of the reasons for the humming?
 
...
edit: i agree that it's vibrations that's the issue, probably the floor vibrating and setting up waves in the air in her room. A bit surprised your room doesn't hum as well

I think the reason mine doesn't hum may be because it is drowned out by the noise of my case, the hum really is very low pitched and just audiable in very low noise environments (such as night time), and explains why it can't be heard during the day.

Any suggestions on making the sides weigh more? I love the B25 but it really is light, which "causes" a lot of the noise that the computer makes (and why I think the P150 is a better noise reducing case).

Another thing I just thought about is I don't think I added any rubber grommits to the fan attached to the case, which could also make a difference (at least partly) to the vibrations. As long as it isn't the PSU fan or GFX fan that is the problem that shoud help reduce it majorly...

On the note of Rubber grommits, has anyone used either the Akasa or Acousti ones that OcUK sell, any good?
 
Last edited:
Acousti will be ordered tomorrow then. :) I didn't think about replacing the PSU fan screws as well.

I'm not too sure about sticking flashing tape to the inside of my case tbh, I know how messy it can be, and don't really want to destroy the inside. Possibly a last resort however. :)
 
Very true. :)

I used to have my HDD's suspended in the p150, however no such luck in the B25. I was thinking instead of seeing if I can suspend them again, going to have to take a look inside tomorrow I think.

Just ordered the Acousti's so they should arrive tomorrow hopefully (dispatched RM 1st)...
 
Well I got my Acousti things today, and spent an hour trying to fit two fans with them, they are a right pain!

However it doesn't seem to have solved the problem, but I do now know what is causing it, obviously it's the hardest thing to sort...

It's the PSU fan that I assume is giving up the ghost slightly, and is impossible to attach with the Acousti things. So my only option is to replace it and possibly leave the grill off and use some double sided padded tape, not an ideal solution however...
 
Elastic band PC? :D

However as JonJ says elastic bands are liable to break, I had a set of bands for using in my P150 (provided with the case) and they broke after about a month..

I managed it in the end, it was just the opposite side of the fans where I had the problem, I couldn't reach them, even with a pair of long nose pliers or tweezers. I managed to get them in the end however, by seemingly taking apart most of the PC...

Having thought about it after writing the last post I think they would actually fit (I thought the holes in the PSU were too big, however they probably aren't), i'm just a bit nervous about running a PSU without a fan guard. I think i'm going to replace the fan in it first however as it is humming up and down, so there is something wrong with it.

As for the HDD's I don't think they are actually the problem, it all seems to be down to the PSU fan, so although I'm thinking about suspending the cage i'll leave that until i've checked whether changing the PSU fan will suffice.

Haven't sat it on anything heavy yet, that's again on my to do list. :D
 
Ahh, I think i've seen a photo of that actually, have you posted one up on OcUK? I've just ordered another set for the PSU, and if it's still annoying me after mounting it like that, replace it. :)

Quieting your PC is a never ending battle, I've spent so long changing fans, cases and fan speeds to get the right combination I'm at the point where there are only two issues now (other than possibly the HDD's, after changing my case), the PSU fan, and what always used to be the loudest component in my system, the GFX fan (fitted with an aftermarket fan at 5v), unfortunately unless I go passive with that (using a 6800GT atm) there is no way of making it quieter. :)

At the moment I have two case fans running, one 120mm at the front and the other 120mm at the back (both 5v'd), as well as a 120mm (manually set to min) on my CPU cooler. All are a selection of high quality quiet fans, which I've never been able to hear over the GPU fan.

mogwai, i don't think that would help me in my situation as the PSU only touches the sides of my case, and there is no space between the PSU and case to fit anything in. :)
 
Right, update:

Gromited the PSU fan and no difference, so I decided as a few said on here that it must be the HDD's, so I made some silicone feet (using sealant) and tried again. Lo and behold the humming had gone and the machine was very silent. However I couldn't get any signal to the monitor...

After a week of non use I managed to go out and get a DVI-VGA adaptor thinking I may have broken the old one, nothing happened, so I swapped the PSU cables around in the PSU (modular) and signal worked (I fiddled with some other stuff as well so maybe...).

Anyway after using it for a day I realised my newest 500GB Hitachi HDD was missing, with all my media on... So out comes the PC AGAIN and I find the power cable has been knocked out, plug it back in and turn on again, humming starts again, with vibration of the case going from practically nothing to noticeable..

I've just unplugged the power cable again and the humming has gone again, so it's obviously just that HDD that is causing the problem. Which to me indicates maybe a dud HDD? It still seems to work and there is no *click of death* however none of my other (older) Hitachis' hum up and down.

RMA? It's only about a year old.
 
I'm not sure you will be entitle to a replacement though? The hard drive itself is still working, but it is just making noise? My hard drive makes the same sort of noise, maybe it isn't as loud, but 'loud' comes down to the user's opinion, which I don't think it is anything to base an RMA on. I think you will only be entitle to an RMA if the drive is actually faulty but I could be wrong?

That's the thing, i'm not sure if it is "damaged". My slightly older Hitachi's (2 x 250GB versions) don't make remotely the same noise, and the much higher vibrations and non constant nature seem to suggest to me that maybe there is something wrong with this specific one?

The only way I managed to stop my HTPC from humming was it remove a HDD. Even though they were both essentially silent, it seems two them were resonating off each other, causing a WWWwwwwWWWWwwwwWWWWwwww constantly.

As mentione before with just the two 250GB drives on there is next to no vibration, however when the 500GB drive is plugged in it starts to vibrate massively. The 3 drives are in a single (standard Lian Li) holder with the 250GB drives at top and bottom and the 500GB drive in the middle.

my lian li case came with these rubber rings that you put between the screws and the HDD holes, absorbing most of the vibs - really nice feature. you might be able to do something similar with your case. also try keeping the HDDs as far apart from eachother as possible, and away from other internal components. and tie up all your cables so nothing is loosely touching the case.

Mine did too, and they are already on the drives, it's fine for the other two drives, just not the 500GB one it seems.:confused:
 
Back
Top Bottom