• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

I am having troble with SLI HELP!!!

The card that says "C19 ONLY". One side says "Normal Mode" and the other side should say "SLi Mode". I'm sure that's the one that you should switch and SLi should work (hopefully).
 
Thx for the reply

Yeah that is the one that is in it (C19 only) Normal Mode is up and the sli mode is down should it be the other way then.also do you know how to get it out to change it round.
 
Read the manual, page 21 ;)
































































Oh ok, here's the link to it if you haven't got it: ;)

http://www.giga-byte.com/Support/Motherboard/Manual_Model.aspx?ProductID=1898

It might be useful to have anyway.:p

But here's your quick answer as it's a big download:

1. Gently spread the retaining clips of the socket (left and right and push away from the module) and the
module may then be removed from the socket. Hold the
module by the edges and lift it away from the socket.

2. Position the SLI Mode side of the module above the socket at
a 25o angle. Align the small notch at the top edge of the module
with the key in the socket.

3. Insert the top edge of the module into the socket. Make sure
the gold edge connectors are fully inserted.

4. Gently press down on the two ends of the module until it is
locked in place by the socket clips. (You should hear a "click"
when the module is attached.)
 
You must log in or register to reply here.
Back
Top Bottom