I think something is failing

dokko · 23 Jun 2008 at 19:37

http://support.microsoft.com/?kbid=329284

Problem signature
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.256.6
Locale ID: 2057

Extra information about the problem
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8007AD7030
BCP3: 00000000B2000040
BCP4: 0000000000000800
OS Version: 6_0_6001
Service Pack: 1_0
Product: 256_1
Server information: 404de2fb-f8f6-4524-aa45-20740fbea340

Had it twice now in ten days but everything checks out fine, afterwards apart from this error of course.

Was playing FM there and saving when it crashed, last time i cannot remember what i was doing.

Any ideas?

dokko · 23 Jun 2008 at 19:46

Actually just quickly ran prime95 and got this:

worker thread 2 (i take thats my second core?)

FATAL ERROR: Rounding was 0.5, expected 0.4

Whats that about?

RJC · 23 Jun 2008 at 19:54

What are your specs & are you overclocking.

Could be failing memory, run mem test.

Rob

dokko · 23 Jun 2008 at 20:02

E6600 @ 3.2ghz 8x400
4gb GeiL DDR2
P35 DS3R
8800GTS 512mb
Vista 64

The mem is at stock, only the CPU is OC'd, and its at stock volts.

Edit: Any other tool to test mem, i've got no floppy or means to make a boot (even usb, can't find it)

RJC · 23 Jun 2008 at 20:05

Ok, try, if you have not done so, putting everything back to stock, run Prime and see how you get on.

Was this a new build or have you added any memory lately!

Rob

dokko · 23 Jun 2008 at 20:06

RJC said:
Ok, try, if you have not done so, putting everything back to stock, run Prime and see how you get on.

Was this a new build or have you added any memory lately!

Rob

No, nowts changed since December, really weird tbh.

RJC · 23 Jun 2008 at 20:11

dokko said:
No, nowts changed since December, really weird tbh.

Joys of computing

, If it's been running fine for past months it's going to be the case of testing things in stages, like I said above put all back to stock including recommeded voltages ect & run Prime.

If that fails remove 2 sticks of memory and test with mem test, then swop over and try the other two sticks, if these all past ok it might be motherboard or PSU problem.

Rob

dokko · 23 Jun 2008 at 20:12

Cheers for the advice mate,

Its got well past where it was failing at 3.2 so i guess its the CPU.

I did a check about i may need to increase volts, think i should try that now?

dokko · 23 Jun 2008 at 20:19

Actually i've noticed recently a massive jump in temps.

Even at stock Prime set the alarm off at 60c there, i've even resat the Freezer pro and it's not made much difference.

dokko · 24 Jun 2008 at 13:34

Could anyone give me an idea what volt i should have the cpu @ 3.2?