I want to overclocked ! HOW ?

[x-Baron-x]

hi guys

first i am new at the forum and i come from germany. my english is not so good.

i hope everbody understand it and this my first overclock. i am a newbie in so what

my system is :

processor : amd phenom 2 x6 1055T watercooled with Crosair H50
motherboard : Gigabyte GA 880 GA-UD3H
4 gb ram Pc - 1333 DDR3 CL 9 passiv cooled
1 TB HDD
550 watt Lc Power 6550 Rev 1.3

how i overclock so what ?
i dont want extreme overclock only that it works with 3,2 ghz or 3,3 ghz or 3,4 ghz
only 400 - 600 mhz more stable

which programs must i have ? and i want that it works stable

i heard you can overclocked with this motherboard and processor

the member iviv maded look here with this system :

AMD 1055T @ 3.8Ghz (IFX-14 cooler)
GA-880GA-UD3H, 2x2Gb Ram
AMD 6950 2Gb unlocked to 6970
Xtreme Gamer sound card

but he does not say how he mades, but it works stable
i am a newbie and this my first overclocked
please say in steps how i overclocked

i thanks for the answers

 

[SeeKified]

You may want to read this overclocking guide for beginners.

Basically, go into the motherboard's BIOS (usually by pressing DEL during startup), find the CPU settings and increase the CPU Multiplier. Since your CPU is a Black Edition, it makes things a lot easier since you don't need to worry about increasing bus speeds and CPU->NB multipliers and such. If you only want a small increase (~400-600MHz) you should be fine on the standard voltage. Be careful with the voltage though!

I really recommend reading the guide I linked to though, just to give you an idea of what you need to know.

 

[x-Baron-x]

my cpu amd x6 1055T is not a black edition and the multiplier you can not increase !

the multiplier is by 14x 200 mhz i must do it with manuell settings

and i dont know how i maded

only the bus speed i can increase

 

[SeeKified]

my cpu amd x6 1055T is not a black edition and the multiplier you can not increase !

the multiplier is by 14x 200 mhz i must do it with manuell settings

and i dont know how i maded

only the bus speed i can increase

Ahh, sorry, was thinking of the 1090T. In that case, increase the bus speed to 229 to get a clock speed of 3206 MHz. You might need to lower the memory speed as well, just find the memory settings in BIOS and put Clock to something lower than 667. I'd try with standard memory settings, but it might give you problems.

 

[x-Baron-x]

is the member iviv there ?