I would like to set up a home network to get some hands on experience but do not know where to start

Associate
Joined
25 Sep 2014
Posts
43
My future plan is to get a job in IT support. I am currently studying Networking Fundamentals. I have previously passed a Security Fundamentals exam.

It is all very well learning about all the protocols, DHCP, cable types etc etc. But I would like to actually get some hands on experience at home.

What would be the best and cheapest way to just have a go at setting up a network and become familiar with a server interface etc?

Thank you for your time.
 
Couple of ways. The physical way and the virtual way.

Physical way is get your hands on couple desktops and switches/routers with server operating systems and windows / Linux desktop systems etc then mash up some network skills. Play till your hearts content.

The virtual way is to download a virtual software package like VMware workstation or virtual box and load the operating systems there. Thing is you won't really have hands on with hardware way as it's virtual.

The decision is yours but the best thing you can do is basically just play play and play more.
 
Couple of ways. The physical way and the virtual way.

Physical way is get your hands on couple desktops and switches/routers with server operating systems and windows / Linux desktop systems etc then mash up some network skills. Play till your hearts content.

The virtual way is to download a virtual software package like VMware workstation or virtual box and load the operating systems there. Thing is you won't really have hands on with hardware way as it's virtual.

The decision is yours but the best thing you can do is basically just play play and play more.

Great! Thank you for your response.

I definitely want to go down the physical route. I already have a spare laptop so will get a desktop from somewhere.

I am going to get a router and connect that to my ISP router. Then get a switch, connect the two computers to the switch. Then install server operating system on one of the computers. Is that a good start?!

I just want to know I am going in the right direction, anything after that will be lots of fun playing around!

Thank you.
 
Get a switch, my suggestion is a Cisco switch (something like a 2950 model) and a rollover cable (to configure the Cisco switch), or learn how to make your own. Plenty guides about.

Then connect and play from desktop / server environments.

It's a good start.
 
Search eBay for Cisco LAB, some cheap deals available of older stock, a couple of routers and switches should be enough to get you started.
 
Back
Top Bottom