[I'm Sorry] Spec me a WC setup!

[SiriusB]

OK Ladies and Gentlemen.

Recently I upgraded my rig to an E6600 and related paraphenalia [see sig]. My E6600 is sitting at a rather happy 3.3GHz on a Scythe Ninja rev B. Temps are around 56-57C at full load, which as some may point out is approaching the temperature region known scientifically as a bit toasty!

I want watercooling because I know my chip can do more but I can't push the volts any higher because of the high temps.

I am after a loop or loops that will cool my CPU and GPU [X1900XT] and it has to be as quiet as possible without sacrificing too much performance. There is no budget yet as I am just looking for ideas, but don't go crazy

All of this is going to be internal and will be living in a Coolermaster Stacker - so plenty of room

 

[braz2kuk]

Hi,

Thermochill PA120.3 Rad if it will fit or a 120.2 with 1/2" Barbs
Laing D1 Pump with Plexi top 12V/18W with 1/2" Barbs
Swiftech MICRORES resovoir with 1/2" Barbs
Swiftech Apogee GTX Waterbock with 1/2" Barbs
10ft Tygon 1/2" fitting tubing
Some fittings and barb clips pref the worm driver ones
2 or 3 Yate Loon fans depending on the size of your rad
Danger Den block for you GPU

That should do you, almost identical setup to mine.

 

[Townlea]

Hi,

Thermochill PA120.3 Rad if it will fit or a 120.2 with 1/2" Barbs
Laing D1 Pump with Plexi top 12V/18W with 1/2" Barbs
Swiftech MICRORES resovoir with 1/2" Barbs
Swiftech Apogee GTX Waterbock with 1/2" Barbs
10ft Tygon 1/2" fitting tubing
Some fittings and barb clips pref the worm driver ones
2 or 3 Yate Loon fans depending on the size of your rad
Danger Den block for you GPU

That should do you, almost identical setup to mine.

Everything this person reccommends apart from the blocks

CPU: D-Tek Fuzion (personal preference)

GPU - Ek block rather than the DangerDen - gives a lot better temps

 

[clone]

Yep agree with Townlea on this as i have the CPU: D-Tek Fuzion cooling my E6600 at stock for now @ 23c and i have the northbridge and southbridge on the same loop in a thermochill 120.3

Also i have the micro res all i`ll say is wow it`s tiny but will do the job,or you could get the Danger den bay res.

 

[Townlea]

Yep agree with Townlea on this as i have the CPU: D-Tek Fuzion cooling my E6600 at stock for now @ 23c and i have the northbridge and southbridge on the same loop in a thermochill 120.3

Also i have the micro res all i`ll say is wow it`s tiny but will do the job,or you could get the Danger den bay res.

Awesome temps for even stock!!

I get 56oC load with my 6660@4ghz 1.55v with the D-tek Fuzion

Such a great block

 

[SiriusB]

Thanks for the suggestions so far guys. I am trying to price some of this up, but so far I can't seem to find anywhere that stocks a Laing D1. Seen plenty of D5s!

My email is in trust since I know OcUK dont have it.

EDIT: Cheers for the emails guys, I have enough info now to get the stuff Cheers for your help.