In HwINFO I got a "CPU Bus/Interconnect Errors"

megatron · 12 Jun 2023 at 21:29

I have oveclocked my RAM and infinity fabric only. I have a 5900x, MSI B550 tomahawk, and 2 x 16GB of OcUK 8-pack b-die DDR4 RAM. I didn't notice any error. I don't usually look at my sensor panel (I keep all the values I want in the OSD via MSI afterburner).

HwInfo says its a Windows Hardware Errors (WHEA).

Brizzles · 12 Jun 2023 at 23:29

Unstable overclock

Dg834man · 12 Jun 2023 at 23:39

How high you got the if frequency?

Mr Mcgoo · 13 Jun 2023 at 10:07

Check your soc voltage as it maybe set too low. had a friends pc do the same a few months ago and his soc was set to 900mv/0.9v and needed around 1000mv/1.0v to be stable across all loads.

megatron · 13 Jun 2023 at 11:21

Mr Mcgoo said:
Check your soc voltage as it maybe set too low. had a friends pc do the same a few months ago and his soc was set to 900mv/0.9v and needed around 1000mv/1.0v to be stable across all loads.

I'll take a look thx.

2023-06-13.png

PNG Image

1drv.ms

I set an +offset of 0.0125v for Soc, and comfirmed that Zentimings sees a difference. Now I'll wait to see if I get that error again (hopefully this fixed it).