in/outake switching

Associate
Joined
28 Feb 2011
Posts
1,689
Location
Norwich
Hello guys need advice,
i have the corsair carbide 540 with a h100i rad on the top - fans on the inside of the rad extracting out of the case upwards. Also the sysfan is extracting outwards as well.
980ti is dumping a lot of heat into the case, with the two 140's pulling air in. Infact while gaming it hits its limit at 83c.

Should i turn the two 140's to extract outwards and turn the rad fans and sysfan to bring air into the case from the top?

or any other setup?:confused:
 
Last edited:
If you only have 2 fans for the h100i put them on the underside of the rad pushing air through the rad and up and out the roof, 83c sounds high I'd also double check the pumps working as it should be.

63_zpsuvcrczen.jpg
 
Last edited:
Sorry i didnt explain it correctly. It's just the cpu that is water called it was only mentioned because of the fans, the gpu is air cooled non-ref.
 
Back
Top Bottom