Increased memory issue.

Karateyid · 13 Oct 2015 at 20:09

Just got another 2 X 4gb corsair xms3 1600mhz memory to go into my z77-dh3 motherboard but once installed I'm having system hanging issues and bsod.

I've ran a men test and no issues shown up. Xmp is enabled in the bios and the bios is Upto date. Anyone got any inkling as to what it can be??

wazza300 · 13 Oct 2015 at 20:15

yeah set you cpu/vtt to around 1.10v now and see if its any better,if not try higher around 1.15v

cpu/vtt is for the integrated memory controller inside the cpu,more ram usually needs touch more cpu/vtt voltage

Karateyid · 13 Oct 2015 at 20:41

Tried that but still getting issues with windows 10 not wanting to boot

NTOSKRNL.exe or winload.exe bsod

tried ram in dual mode in both sets of slots and works fine.. just when I add more it throws a wobbler

wazza300 · 13 Oct 2015 at 20:44

are you on the latest bios for your board? might be worth updating if not (edit nvm you are)

your board dh3?

GA-Z77 - Previous BetaBIOS GA-Z77X-UP7 - F7a GA-Z77X-UP5 TH - F12 GA-Z77X-UP4 TH - F11c GA-Z77MX-D3H TH - F7e G1.Sniper 3 - F8n G1.Sniper M3 - F10f GA-Z77X-UD5H - F16g GA-Z77X-UD4H - F3a GA-Z77X-UD3H - F20e GA-Z77X-D3H - F18k GA-Z77-D3H - F23 GA-Z77-HD4 - F2f GA-Z77-HD3 - F3 GA-Z77M-D3H - F15a GA-Z77MX-D3H - F17b GA-Z77N-WiFi - F4a

Jim99 · 13 Oct 2015 at 20:46

Are you overclocked? If so you should go back to stock and test.

Karateyid · 13 Oct 2015 at 20:53

everything is currently at stock. (turned off the overclock to try and fix this)

Sorry board is z77 -d3h according to cpu z

wazza300 · 13 Oct 2015 at 20:55

http://www.mediafire.com/?abkibb98sb28sx2

GA-Z77-D3H - F23 Read more: http://forums.tweaktown.com/gigabyte/28441-gigabyte-latest-beta-bios.html

that's the latest beta bios,might be worth a try

I have 16gb in my z77 up5 th board just fine,but windows 8.1

Karateyid · 13 Oct 2015 at 21:24

yeah I have the F23b bios installed... just doesn't want to play wit 4 x 4gb RAM in it

wazza300 · 13 Oct 2015 at 21:41

How much dram voltage? 1.65v

Can't think what else you can try

Karateyid · 14 Oct 2015 at 06:28

Yeah dram to 1.65v. It's no biggie as got the ram cheap from the mm. I have a spare z77 d3h board so I may give that a whirl n see if it's an issue with the board.

Altho I'm not sure if both PCI E slots work on the other board >.< or why I have a spare board