Installation problems.

SnowTuco

SnowTuco

SnowTuco

Associate
Joined
23 Oct 2007
Posts
15
Hi,

I recently purchased the following

Intel Core 2 Duo E6750 "LGA775 Conroe" 2.66GHz (1333FSB) - Retail

Asus P5K Intel P35 (Socket 775) PCI-Express DDR2 Motherboard

GeIL 2GB (2x1GB) PC2-6400C4 800MHz Ultra Low Latency DDR2 Dual Channel
Kit (GX22GB6400UDC)

Sapphire ATI Radeon X1950 Pro 512MB GDDR3 HDTV/Dual DVI (PCI-Express) - Retail

I've put it all together and and all that happens is the Cpu fan spins up for a second and then shuts down. No bios beeps or anything. I have taken everything apart and rebuilt again outside the chassis but still get the same problem.

Has anyone any idea what the problem might be. Could the RAM be incompatible with this motherboard? Does anyone recognise these symptoms and know what the problem might be i.e. duff Motherboard?

I bought a new 500w power supply also to cope with the graphics card and have tested this with my old kit so i've ruled out that as a problem but as my old kit is all incompatible with the new this is the only part i can swap between the two.
 
Cheers Rob,

Yep tried different sticks of ram, 1 at a time in different slots. I've also tried reseting the Bios, The two power cables are plugged in the 20 pin and 4 pin. The LED is on, on the motherboard so that is getting powered. With all the different things i've tried all i can get it to do is spin the fans for a second and then switch off.

S.
 
Rob you could be onto something.

My new power supply has as 20 pin connector and a 4 pin connector the motherboard has a 24 pin power socket. I assumed that it was split to be compatible with older ATX boards as my old board has a 20 pin power socket. I've just looked at the manual and yes there is a 4 pin power connector by the chip that i haven't plugged anything into.

Does this mean there should be another 4 pin power connector from my psu or my psu is not compatible. I'm at work so I can't check this out until i get home.
 
Rob thanks very much for your help, you're a star.

The PSU is an X-power 500w i've just looked at the specs from the net.
The connectors are as follows

Universal 20 + 4 Pin Main ATX Power Connector X 1

4 Pin + 12V Power Connector X 1

6 Pin Power Connector for PCI Express Graphic Card X 1

Peripheral Connector (4 Pin for HDD, DVD … etc) x 6

Floppy Connector (4 Pin) X 2

Serial ATA Power Connector X 1

24 Pin + 8 Pin adapter for AMD ATXGES X 1

So it looks like it does have it and i missed it. Hopefully this will sort out my problem.
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom