Installing dishwasher / existing washing machine

Ironic Namesake · 2 May 2013 at 15:40

Hope someone here can advise!

About to buy a dishwasher which will be next to an existing washing machine - there is 1 cold water tap, and a draining pipe on the floor - both currently used by the washing machine.

Is it a simple task of just adding a Y pipe / connector to the outlet? It looks like a second hose for draining should fit next to the existing one for the washing machine so that part shouldn't be a problem

Installed a dishwasher and washing machine before - but they were in both cases not next to each other, and everything was already in place.

Thanks in advance - below picture of the draining pipe / tap if that makes any difference.

Ironic Namesake · 2 May 2013 at 15:58

Nope, unfortunately not. This is just next to the kitchen with a wall in between and there's no space for a dishwasher there , this is the only place.

Ironic Namesake · 2 May 2013 at 16:19

Ok, thanks

So something like this at the tap should be fine : http://www.amazon.co.uk/Washing-Machine-Dishwasher-Piece-Splitter/dp/B005AUMIZA/ref=pd_sxp_f_i

Is there anything similar available for the outlet in case both pipes don't fit in next to each other?

Ironic Namesake · 2 May 2013 at 16:37

I won't be using both appliances at the same time - as I only have one plug point there (currently split to washing machine/drier)