Inwin 703 review @ TechPowerUp

HI GUYS

ok i have both these cases...the 703 and the 707

here we go:-

1....the 703 is very small inside and has no roof fans, its paint finish chips easily especially when you remove the side panels, this reveals bare shiny Stainless :eek: the case is also too narrow, Megahalems only just fits inside............this case will definitely run way too hot without roof fans............FAIL 2/10

2....the 707 is very large inside but still suffers from a substandard paint finish that scrapes off very easily, but it does has very good cooling..................6/10

3....they are both very poor in comparison to my latest Phanteks black ( with no side window) this case is just tremendous, even better than my original Phanteks white..10/10

both the IN-Win cases look really nice.....but their quality is quite low due to their dreadful paint jobs, DO NOT BUY AN IN-WIN.

unfortunately due to no undercoat/primer on the IN-WIN 700 series, i do not trust the paint finish on the D-Frame either
 
Last edited:
the IN-WIN 707 just needs a respray and it'll be brilliant, mine is upstairs waiting for the Airbrush ;)

it needed to be stripped back to bare metal before applying satin black, it will then need a metalflake overlay and gloss lacquer, i use car paints only.

as said, it's factory paint job is rubbish, it chips off really easily

the 707 has a massive amount of space inside and it still looks gorgeous, so it deffo isn't a write-off, i've replaced the side window with a perforated Ally sheet, this is just a fun project for me to work on when i'm bored, i doubt i'll ever use the case
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom