Is it safe?

keyboardwarrior

keyboardwarrior

keyboardwarrior

Permabanned
Joined
26 Jan 2009
Posts
153
Right...

Its done...OC'd...i hope.

Settings

CPU Frequency = 460
Vcore = 1.288 (is this high?)
Multi = x9
Speed = 4150Mhz
RAM = 920Mhz
NB = Stock
RAM = 2.2V
TEMPS
Idle = 27 - 31C
Load(under Orthos) = 52C

Seems my crappy 800Mhz RAM is holding back anything above this.

Im not going to pop the E8400 am I?

P.S. Sorry about all the threads....:p

KbW
 
Everything looks good, temps are nice and low and the vcore is well below the 1.4v that most reccomend on the 45nm chips, nice oc.:)
 
setter said:
Everything looks good, temps are nice and low and the vcore is well below the 1.4v that most reccomend on the 45nm chips, nice oc.:)
Click to expand...

And im a n00b coming from a stock AMD X6000+.

Just going to do another 30mins orthos, then turn speakers off, run orthos on blend while i go bed.(is that safe?)

And if it helps my E8400 was bought only today and its an E0...

KbW
 
Being honest with you if my readings came back like that I'd push for more as they look well sound/safe.
run it for a week keeping an eye on everything & then either push for more or forget about it & enjoy.
 
To test the stability of the cpu overclock its best to use small fft test, blend is an all round test which tests both cpu and ram.
 
malc30 said:
Being honest with you if my readings came back like that I'd push for more as they look well sound/safe.
run it for a week keeping an eye on everything & then either push for more or forget about it & enjoy.
Click to expand...

Anything higher and it errors in orthos within seconds, my ram isnt upto the job. (800Mhz GeIL Black Dragon). I was hoping for 4.5Ghz on air, is it possible?

KbW
 
I'd say the CPU is capable of more, but unfortunately if you are at the limits of your RAM then there's not much else you can do.
 
You must log in or register to reply here.
Back
Top Bottom