Is this a safe overclock?

[toon_mad]

Hardware Spec in my sig, im concerned about the MCH and VTT mostly, is this safe:

3.51Ghz - FSB 390mhz x 9
DDR2 @ 780mhz Dual Channel
Vcore: 1.425v
DDR2: 2.1v
CPU VTT: 1.31v
MCH: 1.64v
ICH: 1.25v
ICHIO: 1.7v
Memory Timings: 5-5-5-18-1T

I dont want to burn or fry anything - please advise cheers

 

[almighty15]

Hardware Spec in my sig, im concerned about the MCH and VTT mostly, is this safe:

3.51Ghz - FSB 390mhz x 9
DDR2 @ 780mhz Dual Channel
Vcore: 1.425v
DDR2: 2.1v
CPU VTT: 1.31v
MCH: 1.64v
ICH: 1.25v
ICHIO: 1.7v
Memory Timings: 5-5-5-18-1T

I dont want to burn or fry anything - please advise cheers

Whats your tempretures like??

 

[toon_mad]

well on each core roughly 36c-38c

i was more concerned about heat on the north bridge and south bridge pipes, is there anyway of detecting these?

Edit: i just lowered MCH to 1.56v and VTT to 1.2v, raised vcore to 1.45v

The reason i upped MCH and VTT was roughly 30mins into GTA i would lose signal to the monitor and it would reset. What parameter needs to be changed to deal with this?

Cheers

 

[Angst]

put fsb to 400 that way ram will be 800mhz and at 1:1 and the whole system will be more stable
also if your worried about the nbridge temps buy a small fan and stick it on the heatsink