Is this OC ok?

point decay · 22 Jan 2008 at 16:26

guys,

just finished my first oc (spec in sig)

ran prime for 6hrs and was stable at 3ghz with the FSB at 334,
have since moved my memory back to 800mhz (from 1/1) and dont really want to push things much further. So is there anything else i need to do or am i pretty much done?

cheers

core temps 30-58 degrees from idle to max with the tuniq running at 1200rpm

Pneumonic · 22 Jan 2008 at 16:29

could run a blend test for a couple of hours just to make sure the RAM is stable...

but looks good

point decay · 22 Jan 2008 at 16:49

Pneumonic said:
could run a blend test for a couple of hours just to make sure the RAM is stable... but looks good

cheers, will do..

point decay · 22 Jan 2008 at 17:02

BTW, ive read elsewhere i should have increased the cpu voltage (im still at 1.22v)
is this correct?

ots3go · 22 Jan 2008 at 17:10

Baked said:
BTW, ive read elsewhere i should have increased the cpu voltage (im still at 1.22v)
is this correct?

If it's stable at that voltage, no.

Only up the voltage to combat instability.

point decay · 22 Jan 2008 at 17:14

ots3go said:
If it's stable at that voltage, no.

Only up the voltage to combat instability.

thanks, its been good so far, so will leave it alone.

Jobe · 23 Jan 2008 at 05:02

ots3go said:
If it's stable at that voltage, no.

Only up the voltage to combat instability.

although you could up the volts to see if it will go higher.
say up it to 1.4 and see if you can reach 3.2 or 3.3.
the trick is to watch the temps.
depends on how far you want to go really.

jobe