Is this Ok?

[DRHF]

Hi,

I'm quite new to overclocking, and a little confused.

Can you check my settings below and tell me how I can improve them or if I've gone wrong somewhere.

My Bios

I actually have lots of cooling headroom. The pwm1 setting on speed fan is for my water pump, I have push/pull fans on the radiator with manual switches to make them go faster (their on the lowest setting). If I lower the voltages the system is unstable. If I wanted to go further I guess I have to up the voltage, but I'm not sure how to do this and maintain stability.

 

[spixelspixel]

Your voltage is very high, go into bios and reset everything back to stock. Set voltage to an offset so its around 1.35v and don't change anything else.

 

[passey89]

From overclockers.


***OVERCLOCKING GUIDELINES***

- Do not exceed 1.425v core voltage, doing so could limit lifespan of the CPU
- Aim to keep temperatures below 70c underload if at all possible
- Do not overclock with BCLK, again doing so could limit lifespan of the CPU