Is this overclock safe?

ExecutorKevin · 8 Aug 2011 at 16:38

I have a athlon II 255 3100mhz Clocked at 3559Mhz
I have set the voltage at 1.24000 on the HT - not sure what that means
and Put the PCI overclock at 100

It seems ok at the CPU is idle at 35 degrees, is that voltage safe? It boots up ok and have noticed speed improvements, I will be running prime 95, but does that look ok?

Whats the maximum HT voltage that I can go? I have a ASUS M4N68T-M LE V2 motherboard

Thanks.

ExecutorKevin · 8 Aug 2011 at 22:40

I eventually clocked it to 3.8Ghz on 1.38V which is my motherboards maximum
on prime it lasts for about 10mins so if I set it at 3.78/79 it should become stable. I really wanted it to push to 4Ghz as the temps are still low cause on the torture test it only hits 50 degrees, but my motherboards volts don't go any higher on the HT and I don't know how to use the other settings :/
The multipliers currently at 246.

ExecutorKevin · 9 Aug 2011 at 00:01

so why won't the Hyper transport voltage go over 1.38V
or am I on the wrong voltage? there are loads of voltages on there.

ExecutorKevin · 9 Aug 2011 at 02:39

WHAT HAVE I DONE! what does the HT voltage do? could I have damaged my system/graphics card O.O I have now realised my mistake and that the option under it was the CPU overvoltage, I have turned it down to auto, put the cpu overvoltage to to 1.45v and set the multiplier to 250 and running at 3.85Ghz

so has any damage been done? is the cpu overvoltage the right settings :'(

ExecutorKevin · 9 Aug 2011 at 10:23

I've tried 3.8 @ 1.45 but it won't boot up it says its failed when I reboot, do you think I should go straight for the 1.55v?