Issue with my new build using the 9070 XT

mogwai

mogwai

mogwai

Associate
Joined
27 Aug 2004
Posts
1,000
I am in the process of building my new pc which has the specs below:


Ryzen 9900x
ASRock X870e Nova
64 Gb Corsair Ram
2tb Crucial RAM
Sapphire RX9070 XT.

I had initially built the pc back in January while I waited for the new GPU's to launch. So have been using GPU built into the CPU up to now and the system has been fine. However today I have added my new 9070 XT and when I have the HDMI cable plugged into it I am not getting any display out at all. I have checked the BIOS and it is to the External Graphics. The RGB on the card is lit up. So I am hoping someone might be able to advise what I need to change to get the card working correctly.
 
Reseat the card and its power cables, both on the card and PSU if it's modular. Ensure the card is fully and equally seated in the PCI-E slot.

Clear the CMOS before you try to boot after doing the above.
 
Checked the power cables which all seem to be seated correctly along with the card itself. But re seated the card anyway and after that I noticed it showing up in windows. So I switched off the pc moved the cabled to the discreet gpu and it is working now. Even without disabling the integrated graphics. But I will now disable the integrated graphics as I don't need them.
 
mogwai said:
Checked the power cables which all seem to be seated correctly along with the card itself. But re seated the card anyway and after that I noticed it showing up in windows. So I switched off the pc moved the cabled to the discreet gpu and it is working now. Even without disabling the integrated graphics. But I will now disable the integrated graphics as I don't need them.
Click to expand...
Good news! Nothing tops a good reseat fixing an issue. Enjoy your new card.
 
Other than it is nice and quiet and I like the hidden power connector I have not tried it out much yet.
 
You must log in or register to reply here.
Back
Top Bottom