Issues Fitting CPU Fans

Jonnodude

Jonnodude

Jonnodude

Associate
Joined
15 Jul 2010
Posts
139
Hi all,

Last year I built a gaming PC and I have now just upgraded my processor to an AMD Ryzen 5900X, which I only just managed to get hold of at Overclockers, and to cool it I previously bought a Noctua NH-D15 cooler which I installed with it today.

In my case (PHANTEKS Eclipse P400A) it all mostly fits in except that the Noctua fan mounted closest to the front of my PC is seated higher because the RAM underneath it (Crucial Ballistix BL2K8G36C16U4B) is too tall.

I'll link the image here as I seem to fail at attaching images normally (https://imgur.com/o5J7Vxo)
o5J7Vxo

o5J7Vxo


I wanted to ask you good people what my options are, and which is the best one.

I could...
  1. Leave it as it is and just clean out dust more often, though I'm not sure if a slightly open case negatively affects thermals?
  2. Remove the fan closer to the front of the PC and operate the heatsink with just one Noctua fan, but be able to close the case?
  3. Look into removing the heatsinks off of the Crucial Ballistix RAM to see if I can make it shorter?
Are there any other better options I have not thought of, and if not which of the above would you all recommend?

Many thanks in advance,

Jon.
 
Dg834man said:
Fit a 120mm fan on the front?
Click to expand...

My case has 3x 120mm front fans built-in anyway, so I wouldn't have any extra space to mount it.

postmanfw said:
Fit both fans behind the heatsink rather than infront :)

Did that with mine so i can see the ram :)
Click to expand...

Sadly my motherboard is the Asus X570 TUF Gaming WiFi and has quite a large rise where the I/O ports are so the fan would have the same issue there.
 
Dg834man said:
A 120mm on the front of the cooler not your case :cry:
Click to expand...

Ohhhhhhhh :cry:

Yeah that's a good idea, though would I need a Noctua fan to have the little clip thing that fastens it to the heatsink.

Does anyone know what Noctua 120mm fans are good and if they'll have the clip thing to allow the mounting?
 
freddie64 said:
Think the mounts on the fan are the same spacing as a 120mm fan so the clips should work ok.

You could try running it with just the middle fan installed.

Not sure which 10mm fan would be best suited so will let someone else advise on that.
Click to expand...

After a little research I've ordered a Noctua NF-F12 PWM to go on the front instead.
I'll probably use the spare 140mm fan as an exhaust fan somehow.

Another potentially silly question, but do you plug the 2nd fan into the "CPU OPT" slot on the mobo or use the Y cable to plug them both into the main "CPU FAN" slot?
 
Thanks everyone for all your responses.

I've got my replacement noctua 120mm fan now and will install that later so I can finally "close this case" :cool:

To be fair my new cooler is already way quieter than the stock AMD prism fan I had with my Ryzen 3600, and thats obviously with the side panel open a bit!

I'm sure once I install the 2nd fan and close the side panel it'll be even quieter anyway :)
 
You must log in or register to reply here.
Back
Top Bottom