• Notice regarding image hosts and attachments. See here.

Issues with build

Associate
Joined
2 Apr 2011
Posts
3
Location
Birmingham
Hello,

Q6600 @ Stock
Asus Maximus Formula mobo w/ Supreme FXii sound card
4GB 800mhz Crucial Ballistix ram
XFX 5770 @ stock
Seagate Barracuda 500 GB 7200 rpm
700W OCZ psu

Recently I have been having troubles with starting my pc, which I suspect has been caused by recently flashing my motherboard to the latest bios. (However I have tried flashing to three earlier bios versions but it doesn't resolve the problem)

When starting the pc for the first time the motherboard lights, cmos light and sound card all flash on and off quickly and the pc will not start. To get the pc to become stable and light up solid, I almost need to bump start the pc by holding in the power/reset buttons on the motherboard (Which is extremely annoying). Once the pc is powered on, everything seems stable enough, but when shutting the pc down the motherboard flashes for a while then reverts back to being solid lights and can then boot.

I have tried using the lcd poster issued with the board and I get a 'CPUINIT' error. I have searched for a while and the problem seems to have no specific cause, but as the error message implies it looks like the cpu is having trouble initializing.

Any help would be appreciated!
 
Last edited:
I tried breadboxing the pc, to single out a fault, but it hasn't solved the problem.
Tried just plugging the psu into the mobo and booting with one stick.

1jw705.jpg

27yc313.jpg

295d62u.jpg


Last picture shows the lights flashing, with the 'CPUINIT' error on the lcd poster.
Very frustrating, I have no clue what is causing the problem so I can replace it.

Any ideas?
 
Back
Top Bottom