Jap import speedo help.

Soldato
Joined
3 Jun 2005
Posts
5,365
Location
West Sussex
I have owned an Mitisbushi FTO GPX for about a year now. I must say for a 20 year old car with 60k on the V6 it has been faultless.

It's first problem has emerge, the speedo has developed an intermittent fault were it works when warm but can be a intermittent when cold.

Doing my research it may be down to a converter chip that changes Kilometres per hour into MPH.

Seems an easy fix (if it is this) however I have no idea were this chip may be located?

Any import owners that can help?
 
It is usually behind the speedo cluster. It can also be spliced in on the gearbox sensor.

Just pull your dials out and see if you can see anything soldered on to start with.
 
But then you'll be limited to 112mph where's the fun in that :p

They are a load of faf though, the one i had broke on my DC5 and the one on my current import impreza just isn't working at all at the moment so i'm very much looking forward to taking the dash apart to get the clocks out to try and fix that..
 
Not sure you would pass an MOT without a proper working speedo though :D

I know, I know...health and safety gone mad
 
Last edited:
Back
Top Bottom